L Series
Showing 81–120 of 285 results
-
Cummins
Sealing O-Ring Cummins Engine ISL – Engine QSL
O-Ring Seal Cummins Engine ISL 8.9 /9 – Engine QSL 8.9
Used primarily in the fuel pump system, at the point where the pump connects to its housing or mounting surface, Cummins officially specifies it primarily for 8.9-liter ISC/ISL Tier 3 engines. It creates a seal between the mating surfaces of the fuel pump system, preventing leaks and maintaining proper circuit integrity. Made of Viton/FKM, 75 durometer, a material resistant to fuels, oils, and high temperatures.
Observed on 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9, ISL9 e QSL 8.9 engines.
Before selling or installing an engine, I always recommend verifying the engine’s ESN and CPL, either using Cummins QuickServe or the OEM catalog, or by checking the original number that was removed. The C/ISC/QSC/ISL/QSL family includes numerous revisions to the fuel system, and a cross-reference may only be valid for certain CPLs or configurations.
(0 reviews) -
Crankshaft
Front Crankshaft Oil Seal Cummins Engine L10
Front Crankshaft Oil Seal Cummins Engine L10
(0 reviews) -
Oil Pump
Front Oil Seal Kit Cummins Engine L10
Front Crankshaft Oil Seal Kit Cummins Engine L10
The kit is installed at the front end of the crankshaft, where the shaft passes through the oil pan/front cover. The oil seal keeps the lubricating oil inside the engine while the crankshaft rotates at high speed.
Used primarily in the Cummins L10, M11, ISM, and QSM11 engine families.
Final compatibility must be verified using the ESN (Engine Serial Number) or CPL, because Cummins may use different configurations of the same engine.
(0 reviews) -
Cummins
Rear Crankshaft Oil Seal Cummins Engine ISL- Engine QSL
Rear Main Seal Cummins Engine ISL 8.9 – Engine QSL 8.9 / QSL 9
Rear crankshaft oil seal located in the area where the engine block connects to the flywheel housing. Its function is to prevent engine oil from leaking around the rear end of the crankshaft and to limit the entry of contaminants. This family of oil seals is available with a PTFE sealing element.
Used on the following engines: 4B 3.9, 4BT 3.9, 4BTA 3.9, QSB 4.5, 6B 5.9, 6BT 5.9, 6BTA 5.9, ISB 5.9, QSB 5.9, ISB 6.7, QSB 6.7, B6.7, 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9, QSL 8.9 / QSL9.
With final verification via ESN/CPL for the specific configuration.
(0 reviews) -
Cummins
Front Crankshaft Seal Kit Cummins Engine ISL – Engine QSL
Front Crankshaft Oil Seal Kit Cummins Engine ISL – Engine QSL / QSL 9
The kit is fitted to the front of the crankshaft, at the front gear housing/front cover. Its function is to prevent engine oil from leaking around the crankshaft whilst it is rotating. It typically comprises a technical elastomer seal with a metal reinforcement and a metal support/cover.
Used on the 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL, QSL / QSL 9 engines.
Always check the ESN and CPL before sale, as there may be variations within the ISC/QSC/ISL/QSL families depending on configuration, year and front gear housing.
(0 reviews) -
Cummins
Front Crankshaft Seal Kit Cummins Engine ISL – Engine QSL
Front Seal Service Kit Cummins Engine ISL – Engine QSL
It is located at the front of the crankshaft, in the gear housing/front cover area. It prevents engine oil from leaking around the front end of the crankshaft. The oil seal is typically made of an oil- and temperature-resistant elastomer with a metal backing; the wear sleeve is made of metal and creates a new sealing surface on the shaft when the original sealing surface is worn.
Used on the 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL, QSL engines.
Always compare the ESN and CPL in Cummins QuickServe or the OEM catalog. Cummins allows you to search for parts using the Engine Serial Number and part number, and this is important because there may be different configurations of oil seals, sleeves, and front gear housings within the ISC/ISL/QSC/QSL models.
(0 reviews) -
Cummins
Front Crankshaft Wear Sleeve Cummins Engine ISL – Engine QSL
Front Crankshaft Quick Repair Sleeve Cummins Engine ISL – Engine QSL
It is positioned at the front end of the crankshaft, where it contacts the front oil seal. It creates a new, smooth surface on the area of the crankshaft worn down by the standard oil seal. This allows the crankshaft to be salvaged without having to replace it. It is typically made of hardened or wear-resistant steel, with a machined surface designed to contact the oil seal lip.
Used on the 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC, QSC, ISL, QSL engines.
Always check the engine’s ESN and CPL, or consult the Cummins OEM catalog. There are variations in configuration and crankshaft seals, so compatibility with a specific engine must be confirmed before proceeding with a replacement.
(0 reviews) -
Crankshaft
Crankshaft Oil Seal Kit Cummins Engine L10
Rear Crankshaft Seal Kit Cummins Engine L10
Rear end of the crankshaft, flywheel side. Rear oil seal with wear ring, dry-clutch application, Non-REPTO. Prevents oil leakage between the crankshaft and the flywheel housing.
Final compatibility must be verified using the engine serial number, because the same M11/ISM model may use a different oil seal depending on the flywheel, clutch, and REPTO configuration.
(0 reviews) -
Cummins
Rear Crankshaft Seal Kit Cummins Engine ISL – Engine QSL
Rear Oil Seal Kit Cummins Engine ISL 8.9 – Engine QSL 8.9 / QSL 9
Rear crankshaft oil seal kit with a double-lip seal, designed for Cummins applications with a wet flywheel/clutch housing. Location: rear end of the crankshaft, transmission/flywheel side. Documented equivalent seal made of PTFE. Its function is to prevent engine oil from leaking from the rear end of the crankshaft, maintaining a seal during crankshaft rotation.
The following are listed: ISB4.5, ISB6.7, QSB4.5, QSB6.7, 6C8.3, 6CT8.3, 6CTA8.3, ISC, QSC, ISL, and QSL for applications with a wet clutch housing. And on other engines: 4BT3.9, 6BT5.9, 6CT8.3, 6CTA8.3, 6CTAA8.3, and QSL9
Always verify the ESN (Engine Serial Number), CPL, and wet/dry flywheel housing configuration, because the same engine may use a different rear seal depending on the configuration.
(0 reviews) -
Cummins
Rear Crankshaft Seal Kit Cummins Engine ISL – Engine QSL
Rear Main Seal Kit Cummins Engine ISL – Engine QSL
The kit provides a seal at the rear of the crankshaft, preventing engine oil from leaking at the point where the crankshaft exits the engine block toward the flywheel/transmission housing. It is therefore installed at the rear of the engine block, on the flywheel side. The sealing component is typically made of a technical elastomer that is resistant to oil and high temperatures, combined with metal support/reinforcement elements.
Compatible engines: 4B, 4BT, 6B, 6BT, 6C, 6CT, 6CTA, ISB, QSB, ISC, QSC, ISL, QSL
However, we recommend checking the ESN/CPL before the sale: not all configurations within the same engine family necessarily use the same oil seal.
(0 reviews) -
Cylinder Kit
Cylinder Kit Complete – STD Cummins Engine L10
Cylinder Kit Complete – STD Cummins Engine L10
Engines with CPL numbers: 528, 535, 580, 608, 613, 638, 649, 703, 704, 707, 708, 717, 717, 726, 748, 751, 770 ,773, 774, 775, 776, 777, 778, 779, 783, 784, 785, 786, 788, 799, 835, 836, 881, 882, 882, 894, 919, 921, 958, 966, 978, 1208, 1429, 1443, 1444, 1660,1674, 1687, 1695, 1696, 1697, 1699, 1800, 1849, 1849, 1877, 1900, 1930.
Included:
• Piston
• Piston pin
• Piston pin retainer
• Piston ring set
• Liner
• Liner seals(0 reviews) -
Cylinder Kit
Cylinder Kit Complete – STD Cummins Engine L10
Cylinder Kit Complete – STD Cummins Engine L10
Engines with CPL numbers: 842, 939, 956, 980, 995, 996, 1621, 1622, 1623, 1624, 1625, 1648, 1675, 1677, 1678
Included:
• Piston
• Piston pin
• Piston pin retainer
• Piston ring set
• Liner
• Liner seals(0 reviews) -
Cummins
Complete Cylinder Kit Cummins Engine ISL – Engine QSL
Cylinder Kit Cummins Engine ISL 9 – Engine QSL 8.9
This is a Cummins cylinder kit from the C Series 8.3 L family, specifically documented as a thin-wall/early block configuration, pre-1991. It is installed inside the cylinder block, one for each cylinder. The cylinder liner is mounted in the block; inside it, the piston operates, connected to the connecting rod via the piston pin. The kit restores the engine’s cylinder unit during an overhaul or in-frame repair. It includes the main wear components of the combustion system: piston, piston rings, piston pin, retainers, cylinder liner, and seal. It is used to restore compression, combustion gas sealing, oil control, and proper piston-to-cylinder fit.
Installed on Cummins 6C/L Series, ISC 8.3/L, QSC 8.3/L, ISL 8.9/9, and QSL 8.9 engines.
For this kit, I strongly recommend that you don’t just check the engine model. Check the ESN (Engine Serial Number) → CPL → Cummins QuickServe catalog → cylinder block number/casting number → early thin-wall vs. late thick-wall block → piston number → liner number → machine serial number (if applicable).
(0 reviews) -
Cylinder Kit
Cylinder Kit Complete Cummins Engine 6C – Engine ISC – Engine ISL
Cylinder Kit Complete Cummins Engine 6C Engine ISC Engine ISL
Engine Piston: M-3923164 Liner Kit: M-3802407 Piston Ring Set: M-3802429
Piston Pin: M-3934046 Piston Pin Retainer: M-3920692
(0 reviews) -
Cylinder Kit
Cylinder Kit Complete Cummins Engine 6C – Engine ISC – Engine ISL
Cylinder Kit Complete Cummins Engine 6C Engine ISC Engine ISL9
Engine Piston: M-3926961 Liner Kit: M-3802407 Piston Ring Set: M-3802429
Piston Pin: M-3934046 Piston Pin Retainer: M-3920692
(0 reviews) -
Cylinder Kit
Cylinder Kit Complete Cummins Engine 6C – Engine ISC – Engine ISL9
Cylinder Kit Complete Cummins Engine 6C Engine ISC Engine ISL9
Engine Piston: M-3917707 Liner Kit: M-3802407 Piston Ring Set: M-3802429
Piston Pin: M-3934046 Piston Pin Retainer: M-3920692
(0 reviews) -
Cylinder Kit
Cylinder Kit Complete Cummins Engine ISL
Cylinder Kit Complete Cummins Engine ISL
Piston -M-3802460
Liner Kit M-5404408
(0 reviews) -
L Series
Cylinder Kit Complete Cummins Engine ISL – Engine QSL
Cylinder Kit Complete Cummins Engine ISL 8.9 /9 – Engine QSL 8.9 /9
The kit is installed inside the engine block. The cylinder liner fits into the block’s bore; inside the liner, the piston, piston pin, connecting rod, and crankshaft operate. It forms the thermal assembly of the individual cylinder and must contain combustion pressure, guide the piston, ensure compression sealing, control the oil film via the piston rings, and maintain the correct piston-to-liner clearance. The complete Cummins cylinder kit for engines in the C Series 8.3 L family, or industrial/on-highway/off-highway applications using the correct 8.3 L block configuration, with STD configuration, for the late thick-walled cylinder block #3934899, effective 01/05/1998.
It is used in Cummins 6C 8.3 L, 6CT 8.3 L, 6CTA 8.3 L, ISC 8.3, QSC 8.3, ISL 8.9/9, and QSL 8.9/9 engines.
Compatibility varies by engine CPL, ESN, piston configuration, and cylinder block. Verify the engine serial number before ordering. This wording allows you to correctly include QSL, ISL, QSC, and ISC without incorrectly stating that it fits all of these engines. Cummins itself recommends identifying parts by ESN/CPL and piston configuration.
(0 reviews) -
Cummins
Cylinder Liner Kit Cummins Engine ISL – Engine QSL
Cylinder Liner Kit Cummins Engine ISL 8.9 /9 – Engine QSL 8.9
The cylinder liner is installed inside the cylinder block, forming the cylindrical surface along which the piston moves. The kit is designed to provide the piston’s sliding surface, maintain the correct cylinder geometry, rebuild the cylinder during an engine overhaul, and ensure a proper seal using the included sealing elements. The kit includes a cylinder liner and a liner seal.
Installed on Cummins 6C/L Series, ISC 8.3/L, QSC 8.3/L, ISL 8.9/9, and QSL 8.9 engines.
Generally manufactured up to 1990 / before the 1991 block modifications. To avoid errors, I recommend verifying at least one of the following: Engine Serial Number (ESN), CPL, Cummins QuickServe catalog, block casting number, engine production year, original cylinder liner dimensions, and the number stamped on the old cylinder liner. In particular, it is important to distinguish the early pre-1991 block from later versions.
(0 reviews) -
Piston Kits
Piston Cummins Engine 6C – Engine ISC – Engine ISL9
Piston Cummins Engine 6C Engine ISC Engine ISL Engine ISL9
(0 reviews) -
Piston Kits
Piston Cummins Engine ISL – Engine QSL
Piston Cummins Engine 6C Engine ISC Engine ISL Engine ISL9
(0 reviews) -
Piston Kits
Piston Ring Set Cummins Engine 6C – Engine ISC – Engine ISL
Piston Ring Set Cummins Engine 6C Engine ISC Engine ISL
Ring Piston Top Keystone: M-3901749 Ring Piston Intermediate: M-3919918 Ring Piston Oil Control: M-3901752
(0 reviews) -
-
Cummins
Vibration Damper Cummins Engine L10 – Engine ISL – Engine QSL
Tuned Vibration Damper / Crankshaft Vibration Damper Cummins Engine L10 – Engine ISL – Engine QSL
It is fitted to the front end of the crankshaft and serves to absorb and dampen the torsional vibrations of the crankshaft generated by combustion pulses. It normally consists of a heavy metal structure with an internal damping element; it is also marketed as a viscous vibration damper.
Used on C / 6C 8.3 – ISC – QSC – ISL – QSL engines.
Before making a purchase, I always recommend checking the ESN and CPL, or the Cummins OEM catalogue, as the same 8.3 L engine may use different dampers depending on its configuration, power output, year of manufacture and accessory layout.
(0 reviews) -
Cummins
Vibration Damper Cummins Engine L10 – Engine ISL – Engine QSL
Tuned Vibration Damper / Crankshaft Damper / Harmonic Balancer Cummins Engine L10 – Engine ISL 8.9 – Engine QSL 8.9
It is not just a simple pulley. It is installed at the front end of the crankshaft and functions as a harmonic balancer mounted on the front end of the crankshaft. It serves to reduce torsional vibrations and oscillations of the crankshaft generated during diesel engine operation. It features a metal construction with an elastomeric/rubber damping element.
Viene aplicato su motori: 6C 8.3 /L, 6CT 8.3 /L, 6CTA 8.3 /L, ISC 8.3, QSC 8.3, ISL 8.9, L10, QSL 8.9.
Always verify the ESN/CPL before placing an order, especially for ISC and QSL/L8.9 applications.
(0 reviews) -
Cummins
EGR Valve Gasket Cummins Engine ISL – Engine QSL
Exhaust Gas Recirculation Valve Gasket Cummins Engine ISL 8.9 – Engine QSL 8.9 / 9
Installed in the EGR (Exhaust Gas Recirculation) circuit. It serves to create a seal between the EGR valve and the corresponding manifold/duct, preventing exhaust gas leaks during recirculation. A proper seal allows the EGR system to correctly route a portion of the exhaust gases back into the intake and contributes to the proper functioning of the emissions control system.
It is used on Cummins 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC, QSC, ISL 8.9, and QSL 8.9 / 9 engines.
I wouldn’t automatically consider all ISC/ISL/QSC/QSL units to be compatible. To ensure a proper sale, you need to verify the ESN/CPL and EGR configuration, because specifications can vary depending on the model year, emissions certification, and engine build.
(0 reviews) -
Cylinder Head
Exhaust Manifold for Cummins Engine 6B, BT & BTA5.9
Exhaust Manifold for Cummins Engine 6B, BT & BTA 5.9
(0 reviews) -
Cummins
Exhaust Manifold Gasket Cummins Engine L10
Exhaust Manifold Gasket Cummins Engine L10 / LT10
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews) -
Fuel Pump
Fuel Injection Pump Cummins Engine ISC 8.3L / ISL 8.9L
Fuel Injection Pump Cummins Engine ISC 8.3L / ISL 8.9L
Superseded Part Number: 4954200 , 5594760Interchange Part Number:4954200RX, 2897500, 2897500NX, 4954200NX, 4954200RX, 4954200, 4921431 4903462,, 4921431NX, 3975375, 4088864, 408866NX, 4935674, 84493585R, CAS-8449358466,, CAS-84493585, CAS-87351412, CAS-87351412,, CAS-87351467R, CAS-87697131, 84493584, 84493585, 87351412, 87351467, 87351467R, 87697131, 87351478, 87351478R 87351478C, 87351478EX, 3973228, 5311171, 5311171, 4088643NX(0 reviews) -
Cummins
Fuel Injector Cummins Engine L10
Fuel Injector Cummins Engine L10
Sold with refundable core deposit. $300
(0 reviews) -
-
ISL
Fuel Injector Assembly Cummins Engine ISL-Cummins Engine ISC
Fuel Injector Assembly Cummins Engine ISL-Cummins Engine ISC
(0 reviews) -
-
ISL
Fuel Pump Cummins Engine ISL-Cummins Engine ISC
Fuel Pump Cummins Engine ISL-Cummins Engine ISC
The CORE charge is only a 30 day hold and that I will not be charged as long as
This is a Returnable Fuel Pump 4954907 RX Core Charge $1200 In Hold For 30 Days
If I do not have CORE or fail to return the CORE within 30 days that I will be charged for the CORE amount.
(0 reviews) -
Cummins
Fuel Pump Gasket Cummins Engine L10 – Engine ISM – Engine QSM
Fuel Pump Gasket Cummins Engine L10 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews) -
Cummins
Fuel Pump Shutoff Valve 24 Volts Cummins Engine L10 -Cummins Engine ISL-Cummins Engine QSL
Fuel Pump Shutoff Valve 24 Volts Cummins Engine L10 -Cummins Engine ISL-Cummins Engine QSL
(0 reviews) -
Cummins
Fuel Pump Shutoff Valve12 Volts Cummins Engine L10 -Cummins Engine ISL-Cummins Engine QSL
Fuel Pump Shutoff Valve 12 Volts Cummins Engine L10 -Cummins Engine ISL-Cummins Engine QSL
(0 reviews) -
L Series
Fuel Pump Spider Jaw Coupling Cummins Engine L10 -Cummins Engine ISL-Cummins Engine QSL
Fuel Pump Spider Jaw Coupling Cummins Engine L10 -Cummins Engine ISL-Cummins Engine QSL
(0 reviews) -
Fuel Filter
Fuel Spin-on Cummins Engine ISL
Fuel Spin-on Cummins Engine ISL
Thread O.D Length I. Gskt. F. Gskt. O. Ring 13/16-18 3 11/16 (93.7) 5 13/32 (137.3) G401 [1] Included (0 reviews) -
Fuel Filter
Fuel Spin-on Cummins Engine L10
Fuel Spin-on Cummins Engine L10
ThreadO O.D Length I. Gskt O. Ring: 13/16-18 3 11/16 (93.7) 5 13/32 (137.3) G401 [1] Included (0 reviews)



















































