L Series
Showing 241–280 of 285 results
-
Cummins
Rocker Arm Assembly Cummins Engine ISL – Engine QSL
Rocker Lever Assembly Cummins Engine ISL – Engine QSL
The rocker arm is part of the valve train. It receives motion from the camshaft via the rocker arm and pushrod and transfers it to the valves, enabling the intake and exhaust valves to open and close properly. It thus maintains proper synchronization between the valve train and cylinder operation.
Compatible Engines: Cummins 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9, QSL9.
However, I recommend checking the ESN (Engine Serial Number), CPL, and engine configuration, because within the 6C family, there may be different rocker arm variants depending on the model year and cylinder head configuration.
(0 reviews) -
Cummins
Rod Push Cummins Engine ISL – Engine QSL
Intake & Exhaust Valve Pushrod Cummins Engine ISL – Engine QSL
A rocker arm shaft designed to transfer the rocker arm’s motion to the rocker, ensuring proper operation of the engine’s intake and exhaust valves.
Cummins C Series 8.3 L engines, including the 6C, 6CT, 6CTA, and C8.3. Cummins specifically notes that these are primarily intended for use on non-certified C 8.3 L engines; additionally, aftermarket applications include ISC, QSC, ISL, and QSL engines,
Before considering them 100% interchangeable, I still recommend verifying them using the ESN (Engine Serial Number), CPL, and QuickServe, because their application may vary depending on the engine configuration.
(0 reviews) -
Cummins
Tappet Guide Cummins Engine ISL – Engine QSL
Tappet Guide Pin Cummins Engine ISL – Engine QSL
It keeps the rocker arm properly guided and aligned during the movement generated by the camshaft, contributing to the proper operation of the valve train.
Per motori Cummins ISC, ISL; altre fonti aftermarket lo associano anche a QSC/QSL e alla famiglia 6C 8.3L.
Before considering them 100% interchangeable, I still recommend verifying them using the ESN (Engine Serial Number), CPL, and QuickServe, because their application may vary depending on the engine configuration.
(0 reviews) -
-
Cummins
Pack of 6 Seal – Valve Stem Cummins Engine L10
Valve Stem Seal Cummins Engine L10
It is used on the valve guide to prevent excessive oil from entering the combustion chamber.
Compatible engines: Cummins L10, LT10, LTA10, M11, ISM, and QSM11.
It is advisable to verify the CPL and serial number of the engine, as some configurations may use a different seal.
(0 reviews) -
Cummins
Seal Strip Cummins Engine L10
Seal Strip Cummins Engine L10
Sealing strip for the front cover or gear cover, with internal cushioning, typically made of rubber or an elastomeric compound for gaskets.
Compatible engines: Cummins L10, M11, ISM, and QSM.
It is advisable to verify the CPL and serial number of the engine, as some configurations may use a different seal.
(0 reviews) -
Cummins
Piston Kit Cummins Engine ISL
Piston Kit Cummins Engine ISL 8.9 L
This is an articulated piston kit, used primarily on Cummins QSL9 / QSL 8.9 L engines with the HPCR CM850 system. The kit is mounted inside the cylinder bore and connected to the connecting rod via the pin. Its function is to convert the pressure generated by combustion into linear motion and then, through the connecting rod and crankshaft, into rotational motion. The piston rings ensure that combustion gases are contained, control oil on the cylinder walls, and aid in heat transfer.
Also used in Cummins ISC, QSC, ISL, QSL 8.9 L, and QSL 9 engines.
It should not be automatically considered interchangeable with all QSL9 pistons. There are different configurations; always verify at least one of the following: ESN (Engine Serial Number), CPL, ECM/Control Module, Cummins QuickServe catalog, old piston/crown number, engine application, and dimensional comparison.
(0 reviews) -
Cummins
Piston Kit Cummins Engine QSL 8.9 / 9
Piston Kit Cummins Engine QSL 8.9 L / QSL 9
This is an articulated piston kit, used primarily on Cummins QSL9 / QSL 8.9 L engines with the HPCR CM850 system. The kit is mounted inside the cylinder bore and connected to the connecting rod via the pin. Its function is to convert the pressure generated by combustion into linear motion and then, through the connecting rod and crankshaft, into rotational motion. The piston rings ensure that combustion gases are contained, control oil on the cylinder walls, and aid in heat transfer.
Also used in Cummins ISC, QSC, ISL, QSL 8.9 L, and QSL 9 engines.
It should not be automatically considered interchangeable with all QSL9 pistons. There are different configurations; always verify at least one of the following: ESN (Engine Serial Number), CPL, ECM/Control Module, Cummins QuickServe catalog, old piston/crown number, engine application, and dimensional comparison.
(0 reviews) -
Cummins
Cylinder Liner Sealing Ring Cummins Engine QSL
Seal, Rectangular Ring – Cylinder Liner Cummins Engine QSL 8.9 / QSL 9
It is mounted in the lower section/seal area of the cylinder liner, between the liner and the engine block. It is part of the cylinder liner sealing system. Its main function is to seal the cylinder liner against the engine block, prevent coolant from flowing into unintended areas, prevent contamination between coolant and engine oil, and maintain proper sealing of the cylinder liner during the engine’s thermal cycles.Verified compatible Cummins engines: 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9/9, QSL 8.9/9.I recommend verifying compatibility using the ESN (Engine Serial Number), CPL, QuickServe/Cummins Catalog, cylinder liner number, block number/casting number, engine year/configuration, and a dimensional comparison of the ring.(0 reviews) -
Cylinder Kit
Sealing Ring Liner Cummins Engine L10
Sealing Ring, Liner Cummins Engine L10
(0 reviews) -
Fuel Filter
Secondary Fuel Spin-on Cummins Engine ISL
Secondary Fuel Spin-on Cummins Engine ISL
Thread O.D Length I. Gskt O. Ring M16 x 1.5 3 1/32 (77.0) 4 27/32 (123.0) G449-B Included (0 reviews) -
Fuel Filter
Secondary Fuel Spin-on Cummins Engine L10
Secondary Fuel Spin-on Cummins Engine L10
Thread O.D Length I. Gskt O. Ring M16 x 1.5 3 1/32 (77.0) 4 27/32 (123.0) G449-B Included (0 reviews) -
Fuel Filter
Secondary Fuel Spin-on Cummins Engine QSL
Secondary Fuel Spin-on Cummins Engine QSL
Thread O.D Length I. Gskt O. Ring M16 x 1.5 3 1/32 (77.0) 4 27/32 (123.0) G449-B Included (0 reviews) -
Cummins
Valve Spring Cummins Engine ISL – Engine QSL
Spring – Valve Cummins Engine ISL 8.9 – Engine QSL 8.9 / QSL 9
Located on the cylinder head, on the valve assembly, it is a valve spring installed in the cylinder head. It is used on both the intake and exhaust sides, depending on the engine configuration. It is an engine valve spring made of high-strength spring steel.
It is equipped with Cummins ISC 8.3, QSC 8.3, ISL 8.9, QSL 8.9, and QSL 9 engines.
Before the sale, compatibility must be verified using the ESN (Engine Serial Number), CPL, QuickServe/Cummins Catalog, installed part number, valve rotator configuration, parts manual, and dimensional comparison. The simple “QSL” model is not sufficient to guarantee compatibility with every ESN.
(0 reviews) -
Cummins
Spring – Valve Cummins Engine L10
Valve Spring Cummins Engine L10
Valve train, mounted on the cylinder head to close the valve after it has opened.
Compatible engines: Cummins L10, M11, ISM, and QSM/QSM11.
To confirm exact compatibility, it is advisable to check the engine’s ESN, as it may vary depending on the CPL and configuration.
(0 reviews) -
Starter & Alternators
Starter Cummins Engine ISL
Starter Cummins Engine ISL
- VOLT :24
- CONDITION :New
- ROTATION DIRECTION: Clockwise
- ELECTRIC STARTER TYPE :Direct Drive (DD)
- NUMBER OF TEETH :11
- WARRANTY :1 Year
(0 reviews) -
Starter & Alternators
Starter Cummins Engine ISL
Starter Cummins Engine ISL
- VOLT :12
- POWER :7.300 kw
- HP :9.789
- CONDITION :New
- ROTATION DIRECTION :Clockwise
- ELECTRIC STARTER TYPE :Direct Drive (DD)
- NUMBER OF TEETH:11
- WARRANTY :1 Year
- Right Hand Lever Housing
- SOLENOID POSITION :82 °
(0 reviews) -
Starter & Alternators
Starter Cummins Engine ISL
Starter Cummins Engine ISL
- VOLT :12
- POWER :4.300 kw
- HP :5.766
- CONDITION :New
- ROTATION DIRECTION :Clockwise
- ELECTRIC STARTER TYPE :Planetary Gear Reduction (PLGR)
- NUMBER OF TEETH :12
- GEAR OD :1.815″
- GEAR OD :46.100mm
- SOLENOID POSITION :82.500
- LENGTH :14.016″
- LENGTH :356 mm
- MOUNT HOLE ID : 114mm
- MOUNT HOLE ID : 314mm
- REGISTRY OD :3.622″
- REGISTRY OD :92mm
- Grounded
(0 reviews) -
Starter & Alternators
Starter Cummins Engine L10
Starter Cummins Engine L 10
- VOLT :24
- CONDITION :New
- ROTATION DIRECTION: Clockwise
- ELECTRIC STARTER TYPE :Direct Drive (DD)
- NUMBER OF TEETH :11
- WARRANTY :1 Year
(0 reviews) -
Starter & Alternators
Starter Cummins Engine L10
Starter Cummins Engine L10
- VOLT :12
- POWER :7.300 kw
- HP :9.789
- CONDITION :New
- ROTATION DIRECTION :Clockwise
- ELECTRIC STARTER TYPE :Direct Drive (DD)
- NUMBER OF TEETH:11
- WARRANTY :1 Year
- Right Hand Lever Housing
- SOLENOID POSITION :82 °
(0 reviews) -
Starter & Alternators
Starter Cummins Engine QSL
Starter Cummins Engine QSL
- VOLT :24
- CONDITION :New
- ROTATION DIRECTION: Clockwise
- ELECTRIC STARTER TYPE :Direct Drive (DD)
- NUMBER OF TEETH :11
- WARRANTY :1 Year
(0 reviews) -
Starter & Alternators
Starter Cummins Engine QSL
Starter Cummins Engine QSL
- VOLT :12
- POWER :7.300 kw
- HP :9.789
- CONDITION :New
- ROTATION DIRECTION :Clockwise
- ELECTRIC STARTER TYPE :Direct Drive (DD)
- NUMBER OF TEETH:11
- WARRANTY :1 Year
- Right Hand Lever Housing
- SOLENOID POSITION :82 °
(0 reviews) -
Cummins
Tappet – Hyd Var Timing Cummins Engine L10
Tappet – Hyd Var Timing Cummins Engine L10
(0 reviews) -
Camshaft
Valve Tappet Lifter Cummins Engine ISL – Engine QSL
Valve Tappet Cummins Engine ISL – Engine QSL
The tappet is installed between the camshaft cam and the rest of the valve train. It transmits the cam’s motion to the pushrod/rocker arm system, allowing the valves to open and close properly.
Applications for Cummins ISL, QSL, ISC, QSC, and C-Series engines.
Final compatibility must be verified using ESN, CPL, QuickServe, and the Cummins catalog before installation.
(0 reviews) -
TURBO
Tube Turbo – Oil Drain Cummins Engine ISL
Tube Turbo – Oil Drain Cummins Engine ISL
(0 reviews) -
Turbo
Turbocharger Cartridge Cummins Engine QSL
Turbocharger Cartridge Cummins Engine QSL
(0 reviews) -
-
-
Cummins
New Cylinder Head Cummins Engine ISC – Engine ISL
Cylinder Head Cummins Engine ISC 8.3 – Engine ISL 8.9
It is identified as a Cummins cylinder head for diesel engines. 6 cylinders, 24 valves. It is mounted at the top of the engine block, above the cylinders. It is secured to the engine block using cylinder head bolts, with the cylinder head gasket positioned between the cylinder head and the engine block. It seals the top of the cylinders and forms the upper part of the combustion chambers. Its main functions are to allow air to enter through the intake valves, to expel exhaust gases through the exhaust valves, to house and guide the valves, to support the fuel injectors, and to allow lubricating oil and coolant to flow through dedicated internal passages. Valves and springs included.
It is recommended for use with Cummins ISC 8.3 CM2150, QSC 8.3-500 HO CM850/CM2850, ISL 8.9 CM850, QSL 8.9 CM850/CM2850, QSL 9 M CM2250 L106, and 6C 8.3 series engines.
Always double-check; I wouldn’t assume the number is universally interchangeable on every QSL/ISL without verifying the ESN and CPL.
(0 reviews) -
Cummins
New Cylinder Head Cummins Engine QSC – Engine QSL
Cylinder Head Cummins Engine QSC 8.3 – Engine QSL 8.9 / QSL 9
It is identified as a Cummins cylinder head for diesel engines. 6 cylinders, 24 valves. It is mounted at the top of the engine block, above the cylinders. It is secured to the engine block using cylinder head bolts, with the cylinder head gasket positioned between the cylinder head and the engine block. It seals the top of the cylinders and forms the upper part of the combustion chambers. Its main functions are to allow air to enter through the intake valves, to expel exhaust gases through the exhaust valves, to house and guide the valves, to support the fuel injectors, and to allow lubricating oil and coolant to flow through dedicated internal passages. Valves and springs included.
It is recommended for use with Cummins ISC 8.3 CM2150, QSC 8.3-500 HO CM850/CM2850, ISL 8.9 CM850, QSL 8.9 CM850/CM2850, QSL 9 M CM2250 L106, and 6C 8.3 series engines.
Always double-check; I wouldn’t assume the number is universally interchangeable on every QSL/ISL without verifying the ESN and CPL.
(0 reviews) -
-
-
-
Cummins
Turbocharger Gasket Cummins Engine L10
Turbocharger mounting gasket Cummins Engine L10
It seals the connection between the turbocharger and the exhaust manifold/flange.
Compatible engines: Cummins L10, M11, ISM, and QSM.
Cummins also notes that this product is primarily intended for use with certain uncertified 14-liter N14 engines; exact compatibility should be verified with ESN/CPL.
(0 reviews) -
-
Gaskets
Turbocharger Gasket Cummins Engine L10 – Engine QSL
Turbocharger Gasket Cummins Engine L10-Cummins Engine ISL-Cummins Engine QSL
(0 reviews) -
L Series
Turbocharger Mounting Gasket Cummins Engine ISL-Cummins Engine QSL
Turbocharger Mounting Gasket Cummins Engine ISL-Cummins Engine QSL
(0 reviews) -
Cummins
Valve Cover Gasket Cummins Engine ISL – Engine QSL
Rocker Cover Gasket Cummins Engine ISL 8.9 / ISL 9 – Engine QSL 8.9 / QSL 9
It is located at the top of the engine, under the valve/rocker cover. It is installed between the rocker/valve cover and the top of the cylinder head, creating the seal needed to prevent oil leaks from the valve train.
Fitted with Cummins 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9, ISL 9, QSL 8.9, and QSL 9 engines.
Before making a purchase, I recommend always verifying the part using the ESN (Engine Serial Number) and, when available, the CPL in the Cummins catalog. Alternatively, you can verify it using the valve cover number, casting/stamped number, exact engine model, machine serial number/VIN, OEM parts catalog, or by comparing dimensions with the original gasket.
(0 reviews) -
Cummins
Valve Cover Gasket Cummins Engine ISL – Engine QSL
Rocker Cover Gasket Cummins Engine ISL – Engine QSL
The gasket is installed between the valve cover (rocker/valve cover) and the cylinder head. Its function is to seal the top of the cylinder head, preventing oil leaks and the entry of contaminants into the valve train area.
Used on Cummins 6C/L Series, ISC 8.3, QSC 8.3, ISL 8.9, and QSL 8.9/9 engines.
It should not be purchased based solely on the engine model. In particular, for ISL/QSL applications, you must verify the type of valve cover; one source specifies that it is intended for use with 8-bolt valve covers. For definitive confirmation, I recommend verifying at least one of the following: ESN (Engine Serial Number), CPL, the Cummins QuickServe catalog, the valve cover number, the number of bolts, the VIN/vehicle serial number, the parts manual, and a dimensional comparison with the original gasket.
(0 reviews) -
Cummins
Water Cooler Exhaust Manifold Cummins Engine QSL – Engine ISL
Water Cooler Exhaust Manifold Cummins Engine ISC8.3-QSC8.3-QSL.9 & ISL.9
(0 reviews)











































