M Series
Showing 41–80 of 151 results
-
CumminsCover Plate Gasket Rear Cummins Engine M11
Cover Plate Gasket Rear Cummins Engine M11
Seal the engine plate or cover to prevent oil leaks.
Application for Cummins Engines: L10, M11, ISM and QSM.
Since this is a flat, lightweight gasket, you should verify its shape and holes by comparing it to the removed part or by checking the serial number/CPL.
(0 reviews)$1.55 Add to cart -
CumminsCrankshaft Cummins Engine M11-Cummins Engine ISM-Cummins Engine QSM
Crankshaft Cummins Engine M11-Cummins Engine ISM-Cummins Engine QSM
(0 reviews)$2,772.00 Add to cart -
CumminsLong Snout Crankshaft Cummins Engine M11
Long Snout External Damper Cummins Engine M11
Crankshaft for a 6-cylinder diesel engine, external damper / externally balanced configuration. Long-snout configuration with 5 front holes, one keyway, and an external damper. The crankshaft is installed at the bottom of the engine block, supported by main bearings. It converts the reciprocating motion of the pistons and connecting rods into rotational motion, transmitting the torque produced by combustion to the flywheel and the transmission. Forged steel, with a heat-treating process.
Used on the L10, LT10, ISC 8.3, ISL 8.9, and QSL 8.9 / QSL 9 engines.
Always verify the engine serial number (ESN), CPL, number of nose holes, nose length, damper type, and original OEM number before placing an order. The “L10” model alone is not sufficient, because Cummins uses different crankshaft configurations within the same family.
(0 reviews)$3,995.00 Add to cart -
CumminsFront Oil Seal Kit Cummins Engine ISM – Engine QSM
Front Crankshaft Oil Seal Kit Cummins Engine ISM – Engine QSM11
The kit is installed at the front end of the crankshaft, where the shaft passes through the oil pan/front cover. The oil seal keeps the lubricating oil inside the engine while the crankshaft rotates at high speed.
Used primarily in the Cummins L10, M11, ISM, and QSM11 engine families.
Final compatibility must be verified using the ESN (Engine Serial Number) or CPL, because Cummins may use different configurations of the same engine.
(0 reviews)$35.82 Add to cart -
Crankshaft
Front Oil Seal Kit Cummins Engine M11
Front Crankshaft Oil Seal Kit Cummins Engine M11
The kit is installed at the front end of the crankshaft, where the shaft passes through the oil pan/front cover. The oil seal keeps the lubricating oil inside the engine while the crankshaft rotates at high speed.
Used primarily in the Cummins L10, M11, ISM, and QSM11 engine families.
Final compatibility must be verified using the ESN (Engine Serial Number) or CPL, because Cummins may use different configurations of the same engine.
(0 reviews)$35.82 Add to cart -
CrankshaftCrankshaft Oil Seal Kit Cummins Engine M11 – Engine ISM – Engine QSM
Rear Crankshaft Seal Kit Cummins Engine M11 – Engine ISM – Engine QSM
Rear end of the crankshaft, flywheel side. Rear oil seal with wear ring, dry-clutch application, Non-REPTO. Prevents oil leakage between the crankshaft and the flywheel housing.
Final compatibility must be verified using the engine serial number, because the same M11/ISM model may use a different oil seal depending on the flywheel, clutch, and REPTO configuration.
(0 reviews)$80.67 Add to cart -
CumminsExhaust Manifold Gasket Cummins Engine ISM
Exhaust Manifold Gasket Cummins Engine ISM / ISM11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews)$3.52 Add to cart -
Cummins
Exhaust Manifold Gasket Cummins Engine M11
Exhaust Manifold Gasket Cummins Engine M11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews)$3.52 Add to cart -
Cummins
Exhaust Manifold Gasket Cummins Engine QSM
Exhaust Manifold Gasket Cummins Engine QSM / QSM11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews)$3.52 Add to cart -
CumminsFuel Injector Sleeve Cummins Engine M11
Fuel Injector Sleeve Cummins Engine M11
(0 reviews)$8.55 Add to cart -
CumminsFuel Pump Gasket Cummins Engine L10 – Engine ISM – Engine QSM
Fuel Pump Gasket Cummins Engine L10 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews)$4.10 Add to cart -
M SeriesFuel Pump Gasket Cummins Engine M11
Fuel Pump Gasket Cummins Engine L10 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews)$4.87 Add to cart -
Cummins
Fuel Pump Gasket Cummins Engine M11
Fuel Pump Gasket Cummins Engine M11
(0 reviews)$1.80 Add to cart -
CumminsFuel Pump Shutoff Valve 24 Volts Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
Fuel Pump Shutoff Valve 24 Volts Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews)$29.32 Add to cart -
Cummins
Fuel Pump Shutoff Valve12 Volts Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
Fuel Pump Shutoff Valve12 Volts Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews)$36.42 Add to cart -
CumminsFuel Pump Spider Jaw Coupling Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
Fuel Pump Spider Jaw Coupling Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews)$2.89 Add to cart -
Fuel FilterFuel/Water Separator Spin-on with Drain Cummins Engine ISM
Fuel/Water Separator Spin-on with Drain Cummins Engine ISM
Thread O.D Length I. Gskt. F. Gskt. O. Ring 1-1/4 3 11/16 (93.7) 9 17/32 (242.1) G381-A ES24-D [1] Included (0 reviews)$22.69 Add to cart -
Fuel Filter
Fuel/Water Separator Spin-on with Drain Cummins Engine M11
Fuel/Water Separator Spin-on with Drain Cummins Engine M11
Thread O.D Length I. Gskt. F. Gskt. O. Ring 1-1/4 3 11/16 (93.7) 9 17/32 (242.1) G381-A ES24-D [1] Included (0 reviews)$22.69 Add to cart -
Fuel FilterFuel/Water Separator Spin-on with Drain Cummins Engine M11
Fuel/Water Separator Spin-on with Drain Cummins Engine M11
Thread O.D Length I. Gskt 1 1/4-12 4 11/16 (119.1) 12 3/32 (307.2) BF596 (0 reviews)$47.77 Add to cart -
Fuel FilterFuel/Water Separator Spin-on with Drain Cummins Engine QSM
Fuel/Water Separator Spin-on with Drain Cummins Engine QSM
Thread O.D Length I. Gskt F. Gskt. 1 1/4 3 11/16 (93.7) 9 17/32 (242.1) G381-A ES24-D (0 reviews)$22.69 Add to cart -
CumminsGear Cover Plate Gasket Cummins Engine ISM – Engine QSM
Gear Cover Plate Gasket Cummins Engine ISM – Engine QSM
Seals the gear cover plate. Used with the cast-iron gear cover. Depending on the catalog, it may be listed as “front cover,” “rear cover plate,” or “end plate gasket.”
Main application: 10-liter Cummins L10 engines, especially older, non-certified versions. Some aftermarket catalogs also list it for the M11, ISM, and QSM.
To confirm exact compatibility, it is advisable to check the ESN/CPL, as the application may vary depending on the type of cover.
(0 reviews)$25.45 Add to cart -
Cummins
Gear Cover Plate Gasket Cummins Engine M11
Front Cover Gasket Cummins Engine M11
Seals the gear cover plate. Used with the cast-iron gear cover. Depending on the catalog, it may be listed as “front cover,” “rear cover plate,” or “end plate gasket.”
Main application: 10-liter Cummins L10 engines, especially older, non-certified versions. Some aftermarket catalogs also list it for the M11, ISM, and QSM.
To confirm exact compatibility, it is advisable to check the ESN/CPL, as the application may vary depending on the type of cover.
(0 reviews)$25.45 Add to cart -
CumminsGuide – Valve Cummins Engine ISM-Cummins Engine QSM
Guide – Valve Cummins Engine ISM-Cummins Engine QSM
(0 reviews)$5.57 Add to cart -
CumminsValve Stem Guide Cummins Engine ISM
Valve Stem Guide Cummins Engine ISM
Installed in the cylinder head; it keeps the valve stem aligned during opening and closing. This applies especially to non-certified 10-liter versions.
It is also sold for M11 and ISM applications, but for these motors, it is recommended to check the ESN serial number.
Some catalogs list it for intake valves; other aftermarket catalogs describe it as suitable for both intake and exhaust. The correct installation position must therefore be confirmed via CPL/ESN.
(0 reviews)$2.95 Add to cart -
Cummins
Valve Stem Guide Cummins Engine M11
Valve Stem Guide Cummins Engine M11
Installed in the cylinder head; it keeps the valve stem aligned during opening and closing. This applies especially to non-certified 10-liter versions.
It is also sold for M11 and ISM applications, but for these motors, it is recommended to check the ESN serial number.
Some catalogs list it for intake valves; other aftermarket catalogs describe it as suitable for both intake and exhaust. The correct installation position must therefore be confirmed via CPL/ESN.
(0 reviews)$2.95 Add to cart -
CumminsHand Hole Gasket Cummins Engine ISM – Engine M11 – Engine QSM
Hand Hole Gasket Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM
(0 reviews)$4.45 Add to cart -
Cylinder HeadNew Cylider Head Cummins Engine ISM – Engine M11 – Engine QSM
Cylider Head Cummins Engine ISM – Engine M11 – Engine QSM
With Valve
(0 reviews)$3,600.00 Add to cart -
Cylinder HeadHead Gasket Set Upper Cummins Engine L10 – Engine M11 – Engine N14
Head Gasket Set Upper Cummins Engine L10
(0 reviews)$220.25 Add to cart -
Fuel FilterHigh Efficiency Fuel Spin-on Cummins Engine ISM
High Efficiency Fuel Spin-on Cummins Engine ISM
ThreadO O.D Length f. Gskt 7/8/2014 3 23/32 (94.5) 7 5/32 (181.8) [1] Included (0 reviews)$18.52 Add to cart -
Fuel Filter
High Efficiency Fuel Spin-on Cummins Engine QSM
High Efficiency Fuel Spin-on Cummins Engine QSM
ThreadO O.D Length f. Gskt 7/8/2014 3 23/32 (94.5) 7 5/32 (181.8) [1] Included (0 reviews)$18.52 Add to cart -
Oil FilterHigh Velocity Dual-Flow Lube Spin-on Cummins Engine ISM
High Velocity Dual-Flow Lube Spin-on Cummins Engine ISM
ThreadO O.D Length I. Gskt 2 1/4-12 4 21/32 (118.3) 11 13/32 (289.7) [1] Included (0 reviews)$55.75 Add to cart -
Oil Filter
High Velocity Dual-Flow Lube Spin-on Cummins Engine M11
High Velocity Dual-Flow Lube Spin-on Cummins Engine M11
ThreadO O.D Length I. Gskt 2 1/4-12 4 21/32 (118.3) 11 13/32 (289.7) [1] Included (0 reviews)$55.75 Add to cart -
Oil Filter
High Velocity Dual-Flow Lube Spin-on Cummins Engine QSM
High Velocity Dual-Flow Lube Spin-on Cummins Engine QSM
ThreadO O.D Length I. Gskt 2 1/4-12 4 21/32 (118.3) 11 13/32 (289.7) [1] Included (0 reviews)$55.75 Add to cart -
CumminsHousing Valve Cover Gasket Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM
Housing Valve Cover Gasket Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM OLD PARTS#4973102
(0 reviews)$44.87 Add to cart -
Cummins
In-Frame Overhaul Kit Cummins Engine ISM-Engine QSM11
In-Frame Overhaul Kit Cummins Engine ISM-Engine QSM11
Included :
FP-LK28082423 Cylinder Kit Complete – STD 6 Piston Kit FP–4089386 FP-4025120 Main Bearing Set – STD 1 FP-3016760 Rod Bearing Half Upper/Lower – STD 12 FP-4089478 Head Gasket Set 1 Late L10 FP-3882733PS Oil Pan Gasket Set 1 WIDE FLANGE GASKET This quality aftermarket replacement part is guaranteed to meet OEM specifications, covered by 12-month warranty
Overhaul kits & In-Frame Kits are serial number specific. Please provide this information when ordering to ensure accuracy.
(0 reviews)$2,328.39 Add to cart -
Cummins
In-Frame Overhaul Kit Cummins Engine ISM-Engine QSM11
In-Frame Overhaul Kit Cummins Engine ISM-Engine QSM11
Included :
Engine Kit Part No. Description Qty Part Comment FP-LK28082423 Cylinder Kit Complete – STD 6 Piston Kit FP–4089386 FP-4025125 Main Bearing Set – STD 1 FP-3016760 Rod Bearing Half Upper/Lower – STD 12 FP-4089478 Head Gasket Set 1 Late L10 FP-3882733PS Oil Pan Gasket Set 1 WIDE FLANGE GASKET Overhaul kits & In-Frame Kits are serial number specific. Please provide this information when ordering to ensure accuracy.
This quality aftermarket replacement part is guaranteed to meet OEM specifications, covered by 12-month warranty
(0 reviews)$2,327.79 Add to cart -
Cummins
In-Frame Overhaul Kit Cummins Engine M11-Engine ISM
In-Frame Overhaul Kit Cummins Engine M11-Engine ISM
Included :
Engine Kit Part No. Description Qty Part Comment FP-4025164 Cylinder Kit Complete – STD 6 Piston Kit FP–4025158 FP-4025120 Main Bearing Set – STD 1 FP-3016760 Rod Bearing Half Upper/Lower – STD 12 FP-4089478 Head Gasket Set 1 Late L10 FP-3882733PS Oil Pan Gasket Set 1 WIDE FLANGE GASKET This quality aftermarket replacement part is guaranteed to meet OEM specifications, covered by 12-month warranty
Overhaul kits & In-Frame Kits are serial number specific. Please provide this information when ordering to ensure accuracy.
(0 reviews)$2,064.13 Add to cart -
Cummins
In-Frame Overhaul Kit Cummins Engine M11-Engine ISM
In-Frame Overhaul Kit Cummins Engine M11-Engine ISM
Included :
Engine Kit Part No. Description Qty Part Comment FP-4025164 Cylinder Kit Complete – STD 6 Piston Kit FP–4025158 FP-4025120 Main Bearing Set – STD 1 FP-3016760 Rod Bearing Half Upper/Lower – STD 12 FP-4089478 Head Gasket Set 1 Late L10 FP-3882733PS Oil Pan Gasket Set 1 WIDE FLANGE GASKET This quality aftermarket replacement part is guaranteed to meet OEM specifications, covered by 12-month warranty
Overhaul kits & In-Frame Kits are serial number specific. Please provide this information when ordering to ensure accuracy.
(0 reviews)$2,064.13 Add to cart -
Cummins
In-Frame Overhaul Kit Cummins Engine M11-Engine ISM
In-Frame Overhaul Kit Cummins Engine M11-Engine ISM
Included :
Engine Kit Part No. Description Qty Part Comment FP-4025164 Cylinder Kit Complete – STD 6 Piston Kit FP–4025158 FP-4025125 Main Bearing Set – STD 1 FP-3016760 Rod Bearing Half Upper/Lower – STD 12 FP-4089478 Head Gasket Set 1 Late L10 FP-3882733PS Oil Pan Gasket Set 1 WIDE FLANGE GASKET Overhaul kits & In-Frame Kits are serial number specific. Please provide this information when ordering to ensure accuracy.
This quality aftermarket replacement part is guaranteed to meet OEM specifications, covered by 12-month warranty
(0 reviews)$2,064.13 Add to cart -
Cummins
In-Frame Overhaul Kit Cummins Engine QSM11 Tier II
In-Frame Overhaul Kit Cummins Engine QSM11 Tier II
Included :
Engine Kit Part No. Description Qty Part Comment FP-4024939 Cylinder Kit Complete – STD 6 Piston Kit FP–4024938 FP-4025120 Main Bearing Set – STD 1 FP-3016760 Rod Bearing Half Upper/Lower – STD 12 FP-4089478 Head Gasket Set 1 Late L10 FP-3882733PS Oil Pan Gasket Set 1 WIDE FLANGE GASKET Overhaul kits & In-Frame Kits are serial number specific. Please provide this information when ordering to ensure accuracy.
This quality aftermarket replacement part is guaranteed to meet OEM specifications, covered by 12-month warranty
(0 reviews)$2,739.40 Add to cart
