Additional information
| Weight | 0.17 lbs |
|---|---|
| Dimensions | 3 × 1 × 1 in |
Valve Stem Guide Cummins Engine M11
Valve Stem Guide Cummins Engine M11
Installed in the cylinder head; it keeps the valve stem aligned during opening and closing. This applies especially to non-certified 10-liter versions.
It is also sold for M11 and ISM applications, but for these motors, it is recommended to check the ESN serial number.
Some catalogs list it for intake valves; other aftermarket catalogs describe it as suitable for both intake and exhaust. The correct installation position must therefore be confirmed via CPL/ESN.
$2.95
In StockRelated products
-
CumminsExhaust Manifold Gasket Cummins Engine M11
Exhaust Manifold Gasket Cummins Engine M11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews)$3.52 Add to cart -
CumminsWater Pump Cummins Engine ISM – Engine QSM
Water Pump Cummins Engine ISM – Engine QSM
OLD PARTS No. 2882144
Complete water pump for the cooling system, 3-bolt flange, long shaft, 21-tooth gear, cast iron housing.
Compatible engines: Cummins L10, LT10, M11, M11 Celect, M11 Celect Plus, ISM, ISM11, and QSM11
Engines manufactured from 1991 onward; always check with ESN/CPL.
(0 reviews)$382.25 Add to cart -
CumminsBalance Shaft Bearing Set Cummins Engine M11
Balance Shaft Bearing Set Cummins Engine M11 PARTS OLD #3820566
The aftermarket catalogs indicate that the engine normally requires 7 units. The kit 151565 contains a complete set of your items.
Important: The socket must be installed with pressure hardware, respecting the orientation of the lubrication orifices. After installation it may be necessary to check the internal diameter, alignment and shape of the lever shaft. You don’t have to install it directly.
(0 reviews)$13.94 Add to cart -
CumminsCamshaft Cummins Engine M11
Camshaft Cummins Engine M11
The part is installed longitudinally in the engine block. It operates the valvetrain via tappets, pushrods, and rocker arms, controlling the opening of the intake and exhaust valves and—depending on the engine configuration—the operation of the injectors.
Important: do not confuse part 4004556 with 4004556-20, which some catalogs identify as a different camshaft. To order the correct part, you must compare the number with the engine’s CPL and ESN.
(0 reviews)$790.42 Add to cart