Premium Parts
Liner With Sealing Ring Cummins Engine L10 & M11
$91.43
In StockWith
| Weight | 12.300 lbs |
|---|---|
| Dimensions | 7 × 7 × 13 in |
The cylinder liner is installed inside the cylinder block, forming the cylindrical surface along which the piston moves. The kit is designed to provide the piston’s sliding surface, maintain the correct cylinder geometry, rebuild the cylinder during an engine overhaul, and ensure a proper seal using the included sealing elements. The kit includes a cylinder liner and a liner seal.
Installed on Cummins 6C/L Series, ISC 8.3/L, QSC 8.3/L, ISL 8.9/9, and QSL 8.9 engines.
Generally manufactured up to 1990 / before the 1991 block modifications. To avoid errors, I recommend verifying at least one of the following: Engine Serial Number (ESN), CPL, Cummins QuickServe catalog, block casting number, engine production year, original cylinder liner dimensions, and the number stamped on the old cylinder liner. In particular, it is important to distinguish the early pre-1991 block from later versions.
Piston w/Pin, Retainer & Rings STD Cummins Engine L10
Engines with CPL numbers: 842, 939, 956, 980, 995, 996, 1223, 1224, 1226, 1255, 1346, 1441, 1442, 1619, 1620, 1621, 1622, 1623, 1624, 1625, 1646, 1648, 1675, 1677, 1678
Included:
• Piston
• Piston pin
• Piston pin retainer
• Piston ring set
This is an articulated piston kit, used primarily on Cummins QSL9 / QSL 8.9 L engines with the HPCR CM850 system. The kit is mounted inside the cylinder bore and connected to the connecting rod via the pin. Its function is to convert the pressure generated by combustion into linear motion and then, through the connecting rod and crankshaft, into rotational motion. The piston rings ensure that combustion gases are contained, control oil on the cylinder walls, and aid in heat transfer.
Also used in Cummins ISC, QSC, ISL, QSL 8.9 L, and QSL 9 engines.
It should not be automatically considered interchangeable with all QSL9 pistons. There are different configurations; always verify at least one of the following: ESN (Engine Serial Number), CPL, ECM/Control Module, Cummins QuickServe catalog, old piston/crown number, engine application, and dimensional comparison.