Premium Parts

Customer Service:1 (786) 715-8258
Shopping Cart$0.00
0
5406206 Piston Ring Set Cummins Engine 6CT 8.3, GTA 8.3, ISL 8.9, ISLe 8.9, ISL 9, QSL 8.9, QSL 9

Piston Ring Set Cummins Engine ISL – QSL

Piston Ring Set Cummins Engine ISL 8.9 / 9, ISLe 8.9 – Engine QSL 8.9 / 9, QSLe 8.9

Used on Cummins engines in the ISL/QSL family and in 8.3–9 L applications. Located in the piston. Its function is to seal against combustion pressure, control lubricating oil, and transfer heat from the piston to the cylinder wall. Made of special steel/cast iron for piston rings.

Engines: Cummins ISL9, ISL/ISLe, QSL/QSL9; 6C8.3/GTA8.3 in some applications.

When purchasing a replacement engine, I recommend checking the ESN and CPL, because Cummins may use different piston/piston ring configurations within the same ISL/QSL family.

$44.32

In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0
SKU: PDPM5406206 Categories: , , , , , , , Tag:

Additional information

Weight 0.250 lbs
Dimensions 6 × 6 × 2 in

Related products

  • Head Gasket Set Upper Cummins Engine ISC 8.3 QSC 8.3 ISL QSL
    Cummins

    Head Gasket Set Upper Cummins Engine ISL – Engine QSL

    Upper Gasket Kit Cummins Engine ISL 8.9 – Engine QSL 8.9 / QSL 9

    This is the gasket kit for the upper part of the engine, used during work on the cylinder head or engine overhaul. It is designed to restore the seal between the cylinder head, engine block, manifolds, fuel injectors, oil circuit, and other upper engine components. It includes the cylinder head gasket, exhaust manifold gaskets, valve stem seals, fuel injector seals, O-rings, and other gaskets for the upper part of the engine.

    For select ISC 8.3, QSC 8.3, ISL 8.9, and QSL 8.9/QSL9 applications with the CAPS CM554 system.

    Before placing an order, verify the Engine Serial Number (ESN) and CPL; this does not apply to all ISC/QSC/ISL/QSL versions; the CAPS/CM554 configuration is the determining factor.

    (0 reviews)
    $330.99 Add to cart
  • Sealing Ring, Liner Cummins Engine 6C 6CT 8.3 6CTA 8.3 ISC 8.3 ISL 8.9
    Cummins

    Cylinder Liner Sealing Ring Cummins Engine QSL

    Seal, Rectangular Ring – Cylinder Liner Cummins Engine QSL 8.9 / QSL 9

    It is mounted in the lower section/seal area of the cylinder liner, between the liner and the engine block. It is part of the cylinder liner sealing system. Its main function is to seal the cylinder liner against the engine block, prevent coolant from flowing into unintended areas, prevent contamination between coolant and engine oil, and maintain proper sealing of the cylinder liner during the engine’s thermal cycles.
    Verified compatible Cummins engines: 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9/9, QSL 8.9/9.
    I recommend verifying compatibility using the ESN (Engine Serial Number), CPL, QuickServe/Cummins Catalog, cylinder liner number, block number/casting number, engine year/configuration, and a dimensional comparison of the ring.

     

    (0 reviews)
    $4.99 Add to cart
  • 4955372 Rear Crankshaft Seal Kit Cummins Engine ISL 8.9, QSL 8.9 QSL 9
    Cummins

    Rear Crankshaft Seal Kit Cummins Engine ISL – Engine QSL

    Rear Oil Seal Kit Cummins Engine ISL 8.9 – Engine QSL 8.9 / QSL 9

    Rear crankshaft oil seal kit with a double-lip seal, designed for Cummins applications with a wet flywheel/clutch housing. Location: rear end of the crankshaft, transmission/flywheel side. Documented equivalent seal made of PTFE. Its function is to prevent engine oil from leaking from the rear end of the crankshaft, maintaining a seal during crankshaft rotation.

    The following are listed: ISB4.5, ISB6.7, QSB4.5, QSB6.7, 6C8.3, 6CT8.3, 6CTA8.3, ISC, QSC, ISL, and QSL for applications with a wet clutch housing. And on other engines: 4BT3.9, 6BT5.9, 6CT8.3, 6CTA8.3, 6CTAA8.3, and QSL9

    Always verify the ESN (Engine Serial Number), CPL, and wet/dry flywheel housing configuration, because the same engine may use a different rear seal depending on the configuration.

     

    (0 reviews)
    $39.46 Add to cart
  • 3883220 Rocker Lever Cover Gasket Cummins Engine L10 M11 ISM QSM
    Cylinder Head

    Rocker Cover Gasket Cummins Engine L10

    Rocker Cover Gasket Cummins Engine L10

    It is installed between the rocker cover or valve cover and the top of the cylinder head, preventing oil leaks.

    When purchasing, it is advisable to request the ESN/CPL, as there are variations in the cover and the number of screws.

    (0 reviews)
    $42.05 Add to cart