Additional information
| Weight | 0.015 lbs |
|---|---|
| Dimensions | 2 × 2 × 1 in |
Insert – Intake and Exhaust Valve Cummins Engine M11
Valve Insert / Valve Seat Cummins Engine M11
Cylinder head; can be used as a seat for the intake or exhaust valve, depending on the cylinder head configuration.
Compatible engines: Cummins L10 / LTA10. Some aftermarket catalogs also list the M11, but Cummins officially specifies part number 3418040 primarily for non-certified 10-liter L10 engines. Always verify using the Engine Serial Number (ESN).
Related products
-
CumminsValve Stem Guide Cummins Engine M11
Valve Stem Guide Cummins Engine M11
Installed in the cylinder head; it keeps the valve stem aligned during opening and closing. This applies especially to non-certified 10-liter versions.
It is also sold for M11 and ISM applications, but for these motors, it is recommended to check the ESN serial number.
Some catalogs list it for intake valves; other aftermarket catalogs describe it as suitable for both intake and exhaust. The correct installation position must therefore be confirmed via CPL/ESN.
(0 reviews)$2.95 Add to cart -
CumminsBalance Shaft Bearing Set Cummins Engine M11
Balance Shaft Bearing Set Cummins Engine M11 PARTS OLD #3820566
The aftermarket catalogs indicate that the engine normally requires 7 units. The kit 151565 contains a complete set of your items.
Important: The socket must be installed with pressure hardware, respecting the orientation of the lubrication orifices. After installation it may be necessary to check the internal diameter, alignment and shape of the lever shaft. You don’t have to install it directly.
(0 reviews)$13.94 Add to cart -
CumminsOil Seal Kit Rear Cummins Engine M11
Rear Crankshaft Seal Kit Cummins Engine M11
Rear end of the crankshaft, flywheel side; Rear oil seal with wear ring, prevents oil leakage between the crankshaft and the flywheel housing, For certain L10, M11, ISM11, and QSM11 engines, depending on the engine configuration. Dry-clutch application, Non-REPTO.
Final compatibility must be verified using the engine serial number, because the same M11/ISM model may use a different oil seal depending on the flywheel, clutch, and REPTO configuration.
(0 reviews)$68.99 Add to cart -
CumminsBalance Shaft Bearing Set Cummins Engine M11
Balance Shaft Bearing Set Cummins Engine M11
Important: The socket must be installed with pressure hardware, respecting the orientation of the lubrication orifices. After installation it may be necessary to check the internal diameter, alignment and shape of the lever shaft. You don’t have to install it directly.
They appear to be applied on some Komatsu and Doosan-Daewoo teams that use these engines. The definitive compatibility must be confirmed via the ESN.
(0 reviews)$17.05 Add to cart