Gaskets
Showing all 18 results
-
CumminsCover Plate Gasket Rear Cummins Engine L10
Cover Plate Gasket Rear Cummins Engine ISM – Engine QSM
Seal the engine plate or cover to prevent oil leaks.
Application for Cummins Engines: L10, M11, ISM and QSM.
Since this is a flat, lightweight gasket, you should verify its shape and holes by comparing it to the removed part or by checking the serial number/CPL.
(0 reviews)$1.55 Add to cart -
CumminsExhaust Manifold Gasket Cummins Engine QSM
Exhaust Manifold Gasket Cummins Engine QSM / QSM11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews)$3.52 Add to cart -
CumminsFuel Pump Gasket Cummins Engine L10 – Engine ISM – Engine QSM
Fuel Pump Gasket Cummins Engine L10 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews)$4.10 Add to cart -
CumminsGear Cover Plate Gasket Cummins Engine ISM – Engine QSM
Gear Cover Plate Gasket Cummins Engine ISM – Engine QSM
Seals the gear cover plate. Used with the cast-iron gear cover. Depending on the catalog, it may be listed as “front cover,” “rear cover plate,” or “end plate gasket.”
Main application: 10-liter Cummins L10 engines, especially older, non-certified versions. Some aftermarket catalogs also list it for the M11, ISM, and QSM.
To confirm exact compatibility, it is advisable to check the ESN/CPL, as the application may vary depending on the type of cover.
(0 reviews)$25.45 Add to cart -
CumminsHand Hole Gasket Cummins Engine ISM – Engine M11 – Engine QSM
Hand Hole Gasket Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM
(0 reviews)$4.45 Add to cart -
CumminsHousing Valve Cover Gasket Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM
Housing Valve Cover Gasket Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM OLD PARTS#4973102
(0 reviews)$44.87 Add to cart -
GasketsLower Conversion Gasket Set Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM
Lower Conversion Gasket Set Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM
(0 reviews)$355.39 Add to cart -
CumminsOil Cooler Rectangular Seal Cummins Engine ISM Engine QSM
Rectangular Ring Seal Cummins Engine ISM Engine QSM
It is recommended for use in the lubricating oil cooler area of 11-liter Cummins M11 engines, particularly non-certified automotive versions. Normally, two engine gaskets are required when assembling the oil cooler.
The official Cummins website primarily lists it for the M11, but specialized catalogs also confirm compatibility with the L10, ISM, and QSM.
To ensure a successful purchase, it is still advisable to check the ESN and CPL, as the installation may vary depending on the engine configuration.
(0 reviews)$0.92 Add to cart -
CumminsOil Cooler Support Gasket Cummins Engine ISM – Engine QSM
Oil Cooler Gasket Cummins Engine ISM – Engine QSM
It is positioned between the oil cooler bracket/housing and the engine to prevent oil leaks.
Questa guarnizione Cummins risulta utilizzabile su diversi motori della stessa famiglia. Cummins la indica principalmente per l’M11, mentre diversi cataloghi aftermarket la riportano anche per L10, ISM e QSM.
To confirm 100% compatibility, you must check the engine serial number (ESN), because the oil cooler mount may vary depending on the CPL and configuration.
(0 reviews)$1.10 Add to cart -
Gaskets
Oil Pan Gasket Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM
Oil Pan Gasket Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM Parts# 3401290
(0 reviews)$128.49 Add to cart -
CumminsOil Pan Gasket Cummins Engine ISM – Engine QSM
Oil Pan Gasket Cummins Engine ISM – Engine QSM
It is installed between the engine block and the oil pan. It prevents lubricating oil from leaking out and dust or contaminants from entering the lower part of the engine.
For the L10 engine, the Mechanical, CELECT, and Gas versions are listed. Compatibility with other engines, such as the M11, ISM, and QSM, must be verified using the engine serial number (ESN), as different oil pans may be used.
(0 reviews)$44.25 Add to cart -
M SeriesRect. or Square Sealing Ring Cummins Engine M11 – Engine ISM – Engine QSM
Rectangular Ring Seal Cummins Engine M11 – Engine ISM – Engine QSM
It creates a seal between two engine surfaces, preventing oil or other fluid leaks at the mounting point. Cummins specifies its primary use on non-certified 11-liter M11 engines; you can also find them on L10, ISM, and QSM engines.
Exact compatibility must be verified using the ESN, as the location and configuration may vary.
(0 reviews)$3.57 Add to cart -
M SeriesRect. or Square Sealing Ring Cummins Engine M11 – Engine ISM – Engine QSM
Rectangular Ring Seal Cummins Engine M11 – Engine ISM – Engine QSM
Seal the component joint to prevent oil or engine fluids from leaking. Cummins primarily uses it for 11-liter M11 engines, but it is also installed in L10, ISM, and QSM engines.
To confirm the exact application, you should check the motor’s ESN/CPL, as it may vary depending on the configuration.
(0 reviews)$3.59 Add to cart -
CumminsRing – Seal Cummins Engine ISM – Engine M11 – Engine QSM
Rectangular Ring Seal Cummins Engine ISM – Engine M11 – Engine QSM
It creates a static seal between engine components, preventing leaks of oil, coolant, or pressure at the specific mounting point. The exact location varies depending on the engine configuration.
Cummins specifies that this product is primarily intended for use with non-certified 11-liter M11 engines; aftermarket catalogs also list the L10, ISM, and QSM models. Final compatibility must be verified using the engine’s serial number, as it may vary depending on the CPL and configuration.
(0 reviews)$1.69 Add to cart -
CumminsSeal Strip Cummins Engine M11 – Engine ISM – Engine QSM
Seal Strip Cummins Engine L10
Sealing strip for the front cover or gear cover, with internal cushioning, typically made of rubber or an elastomeric compound for gaskets.
Compatible engines: Cummins L10, M11, ISM, and QSM.
It is advisable to verify the CPL and serial number of the engine, as some configurations may use a different seal.
(0 reviews)$12.85 Add to cart -
CumminsTurbocharger Gasket Cummins Engine M11 – Engine ISM – Engine QSM
Turbocharger mounting gasket Cummins Engine M11 – Engine ISM – Engine QSM
It seals the connection between the turbocharger and the exhaust manifold/flange.
Compatible engines: Cummins L10, M11, ISM, and QSM.
Cummins also notes that this product is primarily intended for use with certain uncertified 14-liter N14 engines; exact compatibility should be verified with ESN/CPL.
(0 reviews)$4.58 Add to cart -
Cylinder HeadUpper Head Gasket Set Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM
Upper Head Gasket Set Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM
(0 reviews)$228.60 Add to cart -
CumminsValve Cover Gasket Cummins Engine M11 – Engine ISM – Engine QSM
Valve Cover Gasket Cummins Engine M11 – Engine ISM – Engine QSM
It is installed between the rocker cover or valve cover and the top of the cylinder head, preventing oil leaks.
When purchasing, it is advisable to request the ESN/CPL, as there are variations in the cover and the number of screws.
(0 reviews)$42.05 Add to cart