M Series
Showing 41–80 of 173 results
-
Cummins
Crankshaft Cummins Engine M11-ISM & QSM
Crankshaft Cummins Engine M11-Cummins Engine ISM-Cummins Engine QSM
(0 reviews) -
Cummins
Long Snout Crankshaft Cummins Engine M11
Long Snout External Damper Cummins Engine M11
Crankshaft for a 6-cylinder diesel engine, external damper / externally balanced configuration. Long-snout configuration with 5 front holes, one keyway, and an external damper. The crankshaft is installed at the bottom of the engine block, supported by main bearings. It converts the reciprocating motion of the pistons and connecting rods into rotational motion, transmitting the torque produced by combustion to the flywheel and the transmission. Forged steel, with a heat-treating process.
Used on the L10, LT10, ISC 8.3, ISL 8.9, and QSL 8.9 / QSL 9 engines.
Always verify the engine serial number (ESN), CPL, number of nose holes, nose length, damper type, and original OEM number before placing an order. The “L10” model alone is not sufficient, because Cummins uses different crankshaft configurations within the same family.
(0 reviews) -
Crankshaft
Front Oil Seal Kit Cummins Engine ISM – Engine QSM
Front Crankshaft Oil Seal Kit Cummins Engine ISM – Engine QSM11
The kit is installed at the front end of the crankshaft, where the shaft passes through the oil pan/front cover. The oil seal keeps the lubricating oil inside the engine while the crankshaft rotates at high speed.
Used primarily in the Cummins L10, M11, ISM, and QSM11 engine families.
Final compatibility must be verified using the ESN (Engine Serial Number) or CPL, because Cummins may use different configurations of the same engine.
(0 reviews) -
Crankshaft
Front Oil Seal Kit Cummins Engine M11
Front Crankshaft Oil Seal Kit Cummins Engine M11
The kit is installed at the front end of the crankshaft, where the shaft passes through the oil pan/front cover. The oil seal keeps the lubricating oil inside the engine while the crankshaft rotates at high speed.
Used primarily in the Cummins L10, M11, ISM, and QSM11 engine families.
Final compatibility must be verified using the ESN (Engine Serial Number) or CPL, because Cummins may use different configurations of the same engine.
(0 reviews) -
Crankshaft
Crankshaft Oil Seal Kit Cummins Engine M11-ISM & QSM
Rear Crankshaft Seal Kit Cummins Engine M11 – Engine ISM – Engine QSM
Rear end of the crankshaft, flywheel side. Rear oil seal with wear ring, dry-clutch application, Non-REPTO. Prevents oil leakage between the crankshaft and the flywheel housing.
Final compatibility must be verified using the engine serial number, because the same M11/ISM model may use a different oil seal depending on the flywheel, clutch, and REPTO configuration.
(0 reviews) -
-
Cummins
Exhaust Manifold Gasket Cummins Engine ISM
Exhaust Manifold Gasket Cummins Engine ISM / ISM11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews) -
Cummins
Exhaust Manifold Gasket Cummins Engine M11
Exhaust Manifold Gasket Cummins Engine M11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews) -
QSM
Exhaust Manifold Gasket Cummins Engine QSM
Exhaust Manifold Gasket Cummins Engine QSM / QSM11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews) -
-
Cummins
Fuel Pump Gasket Cummins Engine L10 – Engine ISM – Engine QSM
Fuel Pump Gasket Cummins Engine L10 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews) -
M Series
Fuel Pump Gasket Cummins Engine M11
Fuel Pump Gasket Cummins Engine L10 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews) -
Cummins
Fuel Pump Shutoff Valve 24 Volts Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
Fuel Pump Shutoff Valve 24 Volts Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews) -
Fuel Pump
Fuel Pump Shutoff Valve12 Volts Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
Fuel Pump Shutoff Valve12 Volts Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews) -
Cummins
Fuel Pump Spider Jaw Coupling Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
Fuel Pump Spider Jaw Coupling Cummins Engine M11 -Cummins Engine ISM-Cummins Engine QSM
(0 reviews) -
Fuel Filter
Fuel/Water Separator Spin-on with Drain Cummins Engine ISM
Fuel/Water Separator Spin-on with Drain Cummins Engine ISM
Thread O.D Length I. Gskt. F. Gskt. O. Ring 1-1/4 3 11/16 (93.7) 9 17/32 (242.1) G381-A ES24-D [1] Included (0 reviews) -
Fuel Filter
Fuel/Water Separator Spin-on with Drain Cummins Engine M11
Fuel/Water Separator Spin-on with Drain Cummins Engine M11
Thread O.D Length I. Gskt. F. Gskt. O. Ring 1-1/4 3 11/16 (93.7) 9 17/32 (242.1) G381-A ES24-D [1] Included (0 reviews) -
Fuel Filter
Fuel/Water Separator Spin-on with Drain Cummins Engine M11
Fuel/Water Separator Spin-on with Drain Cummins Engine M11
Thread O.D Length I. Gskt 1 1/4-12 4 11/16 (119.1) 12 3/32 (307.2) BF596 (0 reviews) -
-
-
Fuel Filter
Square Cut Seal Fuel Solenoid Cummins Engine
Square Cut Seal Fuel Solenoid Cummins Engine
(0 reviews) -
Fuel Filter
Fuel/Water Separator Spin-on with Drain Cummins Engine QSM
Fuel/Water Separator Spin-on with Drain Cummins Engine QSM
Thread O.D Length I. Gskt F. Gskt. 1 1/4 3 11/16 (93.7) 9 17/32 (242.1) G381-A ES24-D (0 reviews) -
Cummins
Gear Cover Plate Gasket Cummins Engine ISM – Engine QSM
Gear Cover Plate Gasket Cummins Engine ISM – Engine QSM
Seals the gear cover plate. Used with the cast-iron gear cover. Depending on the catalog, it may be listed as “front cover,” “rear cover plate,” or “end plate gasket.”
Main application: 10-liter Cummins L10 engines, especially older, non-certified versions. Some aftermarket catalogs also list it for the M11, ISM, and QSM.
To confirm exact compatibility, it is advisable to check the ESN/CPL, as the application may vary depending on the type of cover.
(0 reviews) -
Cummins
Gear Cover Plate Gasket Cummins Engine M11
Front Cover Gasket Cummins Engine M11
Seals the gear cover plate. Used with the cast-iron gear cover. Depending on the catalog, it may be listed as “front cover,” “rear cover plate,” or “end plate gasket.”
Main application: 10-liter Cummins L10 engines, especially older, non-certified versions. Some aftermarket catalogs also list it for the M11, ISM, and QSM.
To confirm exact compatibility, it is advisable to check the ESN/CPL, as the application may vary depending on the type of cover.
(0 reviews) -
Cummins
Guide – Valve Cummins Engine ISM-Cummins Engine QSM
Guide – Valve Cummins Engine ISM-Cummins Engine QSM
(0 reviews) -
Cummins
Valve Stem Guide Cummins Engine ISM
Valve Stem Guide Cummins Engine ISM
Installed in the cylinder head; it keeps the valve stem aligned during opening and closing. This applies especially to non-certified 10-liter versions.
It is also sold for M11 and ISM applications, but for these motors, it is recommended to check the ESN serial number.
Some catalogs list it for intake valves; other aftermarket catalogs describe it as suitable for both intake and exhaust. The correct installation position must therefore be confirmed via CPL/ESN.
(0 reviews) -
Cummins
Valve Stem Guide Cummins Engine M11
Valve Stem Guide Cummins Engine M11
Installed in the cylinder head; it keeps the valve stem aligned during opening and closing. This applies especially to non-certified 10-liter versions.
It is also sold for M11 and ISM applications, but for these motors, it is recommended to check the ESN serial number.
Some catalogs list it for intake valves; other aftermarket catalogs describe it as suitable for both intake and exhaust. The correct installation position must therefore be confirmed via CPL/ESN.
(0 reviews) -
Cylinder Head
Cylider Head Bolt Cummins Engine ISM – M11 & QSM
Cylider Head Bolt Cummins Engine ISM – M11 & QSM
Use 29 per engine
(0 reviews) -
Cylinder Head
Cylider Head Bolt Cummins Engine ISM – M11 & QSM
Cylider Head Bolt Cummins Engine ISM – M11 & QSM
Use 3 per engine
(0 reviews) -
Gaskets
Hand Hole Gasket Cummins Engine ISM – Engine M11 – Engine QSM
Hand Hole Gasket Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM
(0 reviews) -
Cylinder Head
New Cylider Head Cummins Engine ISM – Engine M11 – Engine QSM
Cylider Head Cummins Engine ISM – Engine M11 – Engine QSM
With Valve
(0 reviews) -
Cylinder Head
Head Gasket Set Upper Cummins Engine L10 – Engine M11 – Engine N14
Head Gasket Set Upper Cummins Engine L10
(0 reviews) -
Fuel Filter
High Efficiency Fuel Spin-on Cummins Engine ISM
High Efficiency Fuel Spin-on Cummins Engine ISM
ThreadO O.D Length f. Gskt 7/8/2014 3 23/32 (94.5) 7 5/32 (181.8) [1] Included (0 reviews) -
Fuel Filter
High Efficiency Fuel Spin-on Cummins Engine QSM
High Efficiency Fuel Spin-on Cummins Engine QSM
ThreadO O.D Length f. Gskt 7/8/2014 3 23/32 (94.5) 7 5/32 (181.8) [1] Included (0 reviews) -
Oil Filter
High Velocity Dual-Flow Lube Spin-on Cummins Engine ISM
High Velocity Dual-Flow Lube Spin-on Cummins Engine ISM
ThreadO O.D Length I. Gskt 2 1/4-12 4 21/32 (118.3) 11 13/32 (289.7) [1] Included (0 reviews) -
Oil Filter
High Velocity Dual-Flow Lube Spin-on Cummins Engine M11
High Velocity Dual-Flow Lube Spin-on Cummins Engine M11
ThreadO O.D Length I. Gskt 2 1/4-12 4 21/32 (118.3) 11 13/32 (289.7) [1] Included (0 reviews) -
Oil Filter
Spin-on Lube Filters Cummins Engine
High Velocity Dual-Flow Lube Spin-on Cummins Engine
Core Product: in EMEA Product Type: High Velocity Dual-Flow Lube Spin-on Contains: Venturi-Type Cone Thread Size: M95 x 2.5 Outside Diameter: 4 21/32 (118.3) Length: 11 25/32 (299.2) Gasket: Integral Gasket: [1] Included (0 reviews) -
Oil Filter
High Velocity Dual-Flow Lube Spin-on Cummins Engine QSM
High Velocity Dual-Flow Lube Spin-on Cummins Engine QSM
ThreadO O.D Length I. Gskt 2 1/4-12 4 21/32 (118.3) 11 13/32 (289.7) [1] Included (0 reviews) -
Cummins
Housing Valve Cover Gasket Cummins Engine ISM- M11 & QSM
Housing Valve Cover Gasket Cummins Engine ISM-Cummins Engine M11-Cummins Engine QSM OLD PARTS#4973102
(0 reviews) -
Cummins
In-Frame Overhaul Kit Cummins Engine ISM-Engine QSM11
In-Frame Overhaul Kit Cummins Engine ISM-Engine QSM11
Included :
FP-LK28082423 Cylinder Kit Complete – STD 6 Piston Kit FP–4089386 FP-4025120 Main Bearing Set – STD 1 FP-3016760 Rod Bearing Half Upper/Lower – STD 12 FP-4089478 Head Gasket Set 1 Late L10 FP-3882733PS Oil Pan Gasket Set 1 WIDE FLANGE GASKET This quality aftermarket replacement part is guaranteed to meet OEM specifications, covered by 12-month warranty
Overhaul kits & In-Frame Kits are serial number specific. Please provide this information when ordering to ensure accuracy.
(0 reviews)






































