Premium Parts
Showing 41–80 of 171 results
Intake Valve Seat Insert Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9 -6BT 5.9-6BTA 5.9
Intake Valve Spring Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9 -6BT 5.9-6BTA 5.9
Lower Gasket Set Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9
Cylinder Head Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9
Comes With 7mm Injector Tubes
Cylinder Head Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9
Comes With 9mm Injector Tubes
Valve Guide Seal Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9 -6BT 5.9-6BTA 5.9
Valve Rotator Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9-6BT5.9 6BTA5.9
Cover Plate Gasket Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9
Rear crankshaft oil seal kit with a double-lip seal, designed for Cummins applications with a wet flywheel/clutch housing. Location: rear end of the crankshaft, transmission/flywheel side. Documented equivalent seal made of PTFE. Its function is to prevent engine oil from leaking from the rear end of the crankshaft, maintaining a seal during crankshaft rotation.
The following are listed: ISB4.5, ISB6.7, QSB4.5, QSB6.7, 6C8.3, 6CT8.3, 6CTA8.3, ISC, QSC, ISL, and QSL for applications with a wet clutch housing. And on other engines: 4BT3.9, 6BT5.9, 6CT8.3, 6CTA8.3, 6CTAA8.3, and QSL9
Always verify the ESN (Engine Serial Number), CPL, and wet/dry flywheel housing configuration, because the same engine may use a different rear seal depending on the configuration.
BRear crankshaft oil seal located in the area where the engine block connects to the flywheel housing. Its function is to prevent engine oil from leaking around the rear end of the crankshaft and to limit the entry of contaminants. This family of oil seals is available with a PTFE sealing element.
Used on the following engines: 4B 3.9, 4BT 3.9, 4BTA 3.9, QSB 4.5, 6B 5.9, 6BT 5.9, 6BTA 5.9, ISB 5.9, QSB 5.9, ISB 6.7, QSB 6.7, B6.7, 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9, QSL 8.9 / QSL9.
With final verification via ESN/CPL for the specific configuration.
Cylinder Sleeve – Repair Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9
Bolt Marine Exhaust Manifold Engine Cummins
M10 X 1.50 X 125.
Screw Exhaust Manifold Engine Cummins
Screw exhaust manifold: Industrial & vehicle
Size: 10mm X 1.50 Long
Front Engine Support Cummins Engine 4B 3.9/4BT 3.9/4BTA 3.9
The pump is mounted on the engine using a two-hole flange. A push rod driven by the cam profile sets the internal impeller in motion; this alternately draws in and delivers fuel. Its function is to draw diesel fuel from the fuel supply system and deliver it to the injection pump at an appropriate pressure and flow rate.
12V Solenoid ToShutoff Fuel Cummins Engine
Fuel ShutOff Solenoid Valve 12 Volts Cummins Engine
Fuel ShutOff Solenoid Valve 24 Volts Cummins Engine
Fuel/Water Separator Spin-on with Drain Cummins Engine 4B 3.9-Engine NT4BT 3.9-Engine 4BTA 3.9
| Thread | O.D | Length | I. Gskt | O. Ring |
| M16 x 1.5 | 3 1/32 (77.0) | 5 11/16 (144.5) | G449-B | Included |
Spin-on Fuel Filters Cummins Engine 4B 3.9-Engine NT4BT 3.9-Engine 4BTA 3.9
| Thread | O.D | Length | I. Gskt | O. Ring |
| M16 x 1.5 | 3 1/32 (77.0) | 5 11/16 (144.5) | G449-B | Included |
Full-Flow Lube Spin-on Cummins Engine 4B 3.9-Engine 4BT 3.9-Engine 4BTA 3.9
| Thread | O.D | Length | I. Gskt | Related to |
| 1-16 | 3 11/16 (93.7) | 5 3/8 (136.5) | Included | BT339 (Long Version) |
Lower Gasket Set Cummins Engine 4B 3.9 – 4BT 3.9 – 4BTA 3.9
Heavy Hex Nut Engine Cummins 4B 3.9- 4BT 3.9- 4BTA 3.9
Head Gasket Set Cummins Engine 4B 3.9 – 4BT 3.9-4BTA 3.9
Head Gasket Set Cummins Engine 4B 3.9 -4BT 3.9-4BTA 3.9
1991-4/2003; STD Head Gasket
In Frame Overhaul Kit Fixed Cummins Engine 4B3.9 – 2 Valves
Include:
FP3802102 Piston w/Retainer & Rings – .50MM Piston FP–3907157; C.R. 16.5:1
FP3934048 Piston Pin
FP4955855 Main Bearing Set – STD 180 Degree Thrust
FP3939859 Rod Bearing Half Upper/Lower – STD
FP3804896S In-Frame Gasket Set 1991-4/2003; STD Head Gasket
Overhaul kits & In-Frame Kits are serial numbers specific. Please provide this information when ordering to ensure accuracy.
This quality aftermarket replacement part is guaranteed to meet OEM specifications, covered by a 12-month warranty.
In Frame Overhaul Kit Fixed Cummins Engine 4B3.9 – 2 Valves
Include:
FP3802160 Piston w/Retainer & Rings – STD Piston FP–3907163
FP3934048 Piston Pin
FP4955855 Main Bearing Set – STD 180 Degree Thrust
FP3939859 Rod Bearing Half Upper/Lower – STD
FP3804896S In-Frame Gasket Set 1991-4/2003; STD Head Gasket
Overhaul kits & In-Frame Kits are serial numbers specific. Please provide this information when ordering to ensure accuracy.
This quality aftermarket replacement part is guaranteed to meet OEM specifications, covered by a 12-month warranty.
In Frame Overhaul Kit Fixed Cummins Engine 4B3.9 – 2 Valves
Include:
FP3802170 Piston w/Retainer & Rings – STD Piston FP–3911400; C.R. 17.5:1
FP3934048 Piston Pin 4
FP4955855 Main Bearing Set – STD 180 Degree Thrust
FP3939859 Rod Bearing Half Upper/Lower – STD
FP3804896S In-Frame Gasket Set 1991-4/2003; STD Head Gasket
Overhaul kits & In-Frame Kits are serial numbers specific. Please provide this information when ordering to ensure accuracy.
This quality aftermarket replacement part is guaranteed to meet OEM specifications, covered by a 12-month warranty.