Additional information
| Weight | 0.35 lbs |
|---|---|
| Dimensions | 4 × 2 × 2 in |
Spring – Valve Cummins Engine M11 – Engine ISM – Engine QSM
Valve Spring Cummins Engine M11 – Engine ISM – Engine QSM
Valve train, mounted on the cylinder head to close the valve after it has opened.
Compatible engines: Cummins L10, M11, ISM, and QSM/QSM11.
To confirm exact compatibility, it is advisable to check the engine’s ESN, as it may vary depending on the CPL and configuration.
$3.75
In StockRelated products
-
CumminsValve Stem Guide Cummins Engine M11
Valve Stem Guide Cummins Engine M11
Installed in the cylinder head; it keeps the valve stem aligned during opening and closing. This applies especially to non-certified 10-liter versions.
It is also sold for M11 and ISM applications, but for these motors, it is recommended to check the ESN serial number.
Some catalogs list it for intake valves; other aftermarket catalogs describe it as suitable for both intake and exhaust. The correct installation position must therefore be confirmed via CPL/ESN.
(0 reviews)$2.95 Add to cart -
CumminsRear Crankshaft Seal Kit Cummins Engine L10 – Engine M11
It Is Part Of The Conversion Gasket Set lower Cummins Engine L10 And Engine M11
Rear end of the crankshaft, flywheel side; Rear oil seal with wear ring, prevents oil leakage between the crankshaft and the flywheel housing, For certain L10, M11, ISM11, and QSM11 engines, depending on the engine configuration. Dry-clutch application, Non-REPTO.
Final compatibility must be verified using the engine serial number, because the same M11/ISM model may use a different oil seal depending on the flywheel, clutch, and REPTO configuration.
(0 reviews)$68.99 Add to cart -
CumminsCamshaft Follower Cummins Engine M11
Camshaft Follower Cummins Engine M11
The cam follower lever operates directly with the camshaft. The lever’s roller follows the cam profile and transfers the movement to the valve train.
During replacement, it is also advisable to check: the roller surface; the roller pin; lever side play; bushings and lever shaft; camshaft lobes; for the presence of pitting, scoring, or uneven wear.
In fact, Cummins and suppliers require the ESN and CPL to confirm compatibility prior to sale.(0 reviews)$182.26 Add to cart -
CumminsMain Bearing Set STD Cummins Engine M11 – Engine ISM – Engine QSM
Main Bearing Set STD Cummins Engine M11 – Engine ISM – Engine QSM
The game is installed on the crankshaft’s main bearings, it is mainly used in non-certified 11-liter M11 engines. This corresponds to the STD size. Do not use if the crankshaft has been ground to 0.010, 0.020, 0.030, or 0.040 inches.
Exact compatibility must be confirmed with the ESN/CPL, as it may vary depending on the crankshaft configuration.
(0 reviews)$126.88 Add to cart