Additional information
| Weight | 0.010 lbs |
|---|---|
| Dimensions | 5 × 4 × 1 in |
Cover Plate Gasket Rear Cummins Engine M11
Cover Plate Gasket Rear Cummins Engine M11
Seal the engine plate or cover to prevent oil leaks.
Application for Cummins Engines: L10, M11, ISM and QSM.
Since this is a flat, lightweight gasket, you should verify its shape and holes by comparing it to the removed part or by checking the serial number/CPL.
$1.55
In StockRelated products
-
CumminsBalance Shaft Bearing Set Cummins Engine ISM – Engine QSM
Balance Shaft Bearing Set Cummins Engine ISM11 – Engine QSM11 PARTS OLD #3820566
The aftermarket catalogs indicate that the engine normally requires 7 units. The kit 151565 contains a complete set of your items.
Important: The socket must be installed with pressure hardware, respecting the orientation of the lubrication orifices. After installation it may be necessary to check the internal diameter, alignment and shape of the lever shaft. You don’t have to install it directly.
They appear to be applied on some Komatsu and Doosan-Daewoo teams that use these engines. The definitive compatibility must be confirmed via the ESN.
(0 reviews)$13.94 Add to cart -
CumminsValve Stem Guide Cummins Engine M11
Valve Stem Guide Cummins Engine M11
Installed in the cylinder head; it keeps the valve stem aligned during opening and closing. This applies especially to non-certified 10-liter versions.
It is also sold for M11 and ISM applications, but for these motors, it is recommended to check the ESN serial number.
Some catalogs list it for intake valves; other aftermarket catalogs describe it as suitable for both intake and exhaust. The correct installation position must therefore be confirmed via CPL/ESN.
(0 reviews)$2.95 Add to cart -
M SeriesWater Pump Cummins Engine M11
Water Pump Cummins Engine M11
Complete water pump for the cooling system, 3-bolt flange, long shaft, 21-tooth gear, cast iron housing.
Compatible engines: Cummins L10, LT10, M11, M11 Celect, M11 Celect Plus, ISM, ISM11, and QSM11
Engines manufactured from 1991 onward; always check with ESN/CPL.
(0 reviews)$382.25 Add to cart -
CumminsBalance Shaft Bearing Set Cummins Engine ISM – Engine QSM
Balance Shaft Bearing Set Cummins Engine ISM – Engine QSM
Important: The socket must be installed with pressure hardware, respecting the orientation of the lubrication orifices. After installation it may be necessary to check the internal diameter, alignment and shape of the lever shaft. You don’t have to install it directly.
They appear to be applied on some Komatsu and Doosan-Daewoo teams that use these engines. The definitive compatibility must be confirmed via the ESN.
(0 reviews)$17.05 Add to cart