Premium Parts
Showing 41–80 of 206 results
Connecting Rod Bearing Pair 0.50MM Cummins Engine Engine 6B 5.9 – 6BT 5.9 – 6BTA 5.9
Connecting Rod Fractured
Bearing Set Consists :
• 1 Upper Bearing (3901171)
• 1 Lower Bearing (4892796)
Connecting Rod Bearing Cummins Set Engine 6B 5.9-6BT5.9-6BTA5.9
Connecting Rod : Non-Fractured
Cylinder Head Capscrew Bolt Cummins Engine 4B -6B Series
Cylinder Head Capscrew Bolt Cummins Engine 4B -6B Series
Cylinder Head Capscrew Bolt Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9-6BT 5.9-6BTA 5.9
Exhaust Valve Guide Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9
Thick Wall – 51.75 mm Long
Exhaust Valve Seat Insert Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9 -6BT 5.9-6BTA 5.9
Exhaust Valve Spring Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9 -6BT 5.9-6BTA 5.9
Intake Valve Guide Cummins Engine
4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9 -6BT 5.9-6BTA 5.9
Thick Wall – 60.50mm Long
Intake Valve Seat Insert Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9 -6BT 5.9-6BTA 5.9
Intake Valve Spring Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9 -6BT 5.9-6BTA 5.9
Cylinder Head Cummins Engine 6B 5.9 -6BT 5.9-6BTA 5.9
7 MM injector tubes
Cylinder Head Cummins Engine 6B 5.9 -6BT 5.9-6BTA 5.9
Valve Guide Seal Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9 -6BT 5.9-6BTA 5.9
Valve Rotator Cummins Engine 4B 3.9- 4BT 3.9- 4BTA 3.9-6B 5.9-6BT5.9 6BTA5.9
Conversion Gasket Set Lower Cummins Engine 6B 5.9 – 6BT 5.9 -6 BTA 5.9 – 2 Valves
Cover Plate Gasket Cummins Engine 6B 5.9 – 6BT 5.9 -6 BTA 5.9
Rear crankshaft oil seal kit with a double-lip seal, designed for Cummins applications with a wet flywheel/clutch housing. Location: rear end of the crankshaft, transmission/flywheel side. Documented equivalent seal made of PTFE. Its function is to prevent engine oil from leaking from the rear end of the crankshaft, maintaining a seal during crankshaft rotation.
The following are listed: ISB4.5, ISB6.7, QSB4.5, QSB6.7, 6C8.3, 6CT8.3, 6CTA8.3, ISC, QSC, ISL, and QSL for applications with a wet clutch housing. And on other engines: 4BT3.9, 6BT5.9, 6CT8.3, 6CTA8.3, 6CTAA8.3, and QSL9
Always verify the ESN (Engine Serial Number), CPL, and wet/dry flywheel housing configuration, because the same engine may use a different rear seal depending on the configuration.
BRear crankshaft oil seal located in the area where the engine block connects to the flywheel housing. Its function is to prevent engine oil from leaking around the rear end of the crankshaft and to limit the entry of contaminants. This family of oil seals is available with a PTFE sealing element.
Used on the following engines: 4B 3.9, 4BT 3.9, 4BTA 3.9, QSB 4.5, 6B 5.9, 6BT 5.9, 6BTA 5.9, ISB 5.9, QSB 5.9, ISB 6.7, QSB 6.7, B6.7, 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9, QSL 8.9 / QSL9.
With final verification via ESN/CPL for the specific configuration.
Cylinder Sleeve – Repair Cummins Engine 6B 5.9 – 6BT 5.9 -6 BTA 5.9
Exhaust Manifold for Cummins Engine 6B, BT & BTA 5.9
Bolt Marine Exhaust Manifold Engine Cummins
M10 X 1.50 X 125.
Screw Exhaust Manifold Engine Cummins
Screw exhaust manifold: Industrial & vehicle
Size: 10mm X 1.50 Long
Fuel Transfer Pump Cummins Engine 6B 5.9 – 6BT 5.9 -6 BTA 5.9
3928143 Subs to 3904374
The pump is mounted on the engine using a two-hole flange. A push rod driven by the cam profile sets the internal impeller in motion; this alternately draws in and delivers fuel. Its function is to draw diesel fuel from the fuel supply system and deliver it to the injection pump at an appropriate pressure and flow rate.
12V Solenoid ToShutoff Fuel Cummins Engine
Fuel ShutOff Solenoid Valve 12 Volts Cummins Engine
Fuel ShutOff Solenoid Valve 24 Volts Cummins Engine
Fuel/Water Separator Spin-on with Drain CumminsEngine 6B 5.9-Engine 6BT 5.9-Engine 6BTA 5.9
| Thread | O.D | Length | I. Gskt | O. Ring |
| M16 x 1.5 | 3 1/32 (77.0) | 5 11/16 (144.5) | G449-B | Included |