Additional information
| Weight | 0.030 lbs |
|---|---|
| Dimensions | 6 × 6 × 1 in |
Fuel Pump Gasket Cummins Engine M11
Fuel Pump Gasket Cummins Engine L10 -Cummins Engine ISM-Cummins Engine QSM
$4.87
In StockRelated products
-
CumminsMain Bearing Set 0.010” Cummins Engine M11 – Engine ISM – Engine QSM
Main Bearing Set 0.010” Cummins Engine M11 – Engine ISM – Engine QSM
Main crankshaft bearings 0.010” undersize, equivalente a 0,25 mm; Cummins lists part number 4025121 primarily for non-certified 11-liter M11 engines; other catalogs also list it for the L10, ISM, and QSM11 families.
Exact compatibility must be confirmed with the ESN/CPL, as it may vary depending on the crankshaft configuration.
(0 reviews) -
CumminsCover Plate Gasket Rear Cummins Engine L10
Cover Plate Gasket Rear Cummins Engine ISM – Engine QSM
Seal the engine plate or cover to prevent oil leaks.
Application for Cummins Engines: L10, M11, ISM and QSM.
Since this is a flat, lightweight gasket, you should verify its shape and holes by comparing it to the removed part or by checking the serial number/CPL.
(0 reviews) -
CumminsOil Cooler Support Gasket Cummins Engine ISM – Engine QSM
Oil Cooler Gasket Cummins Engine ISM – Engine QSM
It is positioned between the oil cooler bracket/housing and the engine to prevent oil leaks.
Questa guarnizione Cummins risulta utilizzabile su diversi motori della stessa famiglia. Cummins la indica principalmente per l’M11, mentre diversi cataloghi aftermarket la riportano anche per L10, ISM e QSM.
To confirm 100% compatibility, you must check the engine serial number (ESN), because the oil cooler mount may vary depending on the CPL and configuration.
(0 reviews) -
CumminsBalance Shaft Bearing Set Cummins Engine M11
Balance Shaft Bearing Set Cummins Engine M11 PARTS OLD #3820566
The aftermarket catalogs indicate that the engine normally requires 7 units. The kit 151565 contains a complete set of your items.
Important: The socket must be installed with pressure hardware, respecting the orientation of the lubrication orifices. After installation it may be necessary to check the internal diameter, alignment and shape of the lever shaft. You don’t have to install it directly.
(0 reviews)