Additional information
| Weight | 17.900 lbs |
|---|---|
| Dimensions | 14 × 9 × 10 in |
Water Pump Cummins Engine ISM
Water Pump Cummins Engine ISM –
Complete water pump for the cooling system, 3-bolt flange, long shaft, 21-tooth gear, cast iron housing.
Compatible engines: Cummins L10, LT10, M11, M11 Celect, M11 Celect Plus, ISM, ISM11,
Engines manufactured from 1991 onward; always check with ESN/CPL.
$382.25
In StockRelated products
-
CumminsExhaust Manifold Gasket Cummins Engine ISM
Exhaust Manifold Gasket Cummins Engine ISM / ISM11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews) -
CumminsSeal – Valve Stem Cummins Engine M11 – Engine ISM – Engine QSM
Valve Stem Seal Cummins Engine M11 – Engine ISM – Engine QSM
It is used on the valve guide to prevent excessive oil from entering the combustion chamber.
Compatible engines: Cummins L10, LT10, LTA10, M11, ISM, and QSM11.
It is advisable to verify the CPL and serial number of the engine, as some configurations may use a different seal.
(0 reviews) -
CumminsBalance Shaft Bearing Set Cummins Engine ISM – Engine QSM
Balance Shaft Bearing Set Cummins Engine ISM – Engine QSM
Important:Â The socket must be installed with pressure hardware, respecting the orientation of the lubrication orifices. After installation it may be necessary to check the internal diameter, alignment and shape of the lever shaft. You don’t have to install it directly.
They appear to be applied on some Komatsu and Doosan-Daewoo teams that use these engines. The definitive compatibility must be confirmed via the ESN.
(0 reviews) -
CumminsBalance Shaft Bearing Set Cummins Engine ISM – Engine QSM
Balance Shaft Bearing Set Cummins Engine ISM11 – Engine QSM11 PARTS OLD #3820566
The aftermarket catalogs indicate that the engine normally requires 7 units. The kit 151565 contains a complete set of your items.
Important:Â The socket must be installed with pressure hardware, respecting the orientation of the lubrication orifices. After installation it may be necessary to check the internal diameter, alignment and shape of the lever shaft. You don’t have to install it directly.
They appear to be applied on some Komatsu and Doosan-Daewoo teams that use these engines. The definitive compatibility must be confirmed via the ESN.
(0 reviews)