Additional information
| Weight | 0.030 lbs |
|---|---|
| Dimensions | 5 × 4 × 1 in |
Turbocharger Gasket Cummins Engine M11 – Engine ISM – Engine QSM
Turbocharger mounting gasket Cummins Engine M11 – Engine ISM – Engine QSM
It seals the connection between the turbocharger and the exhaust manifold/flange.
Compatible engines: Cummins L10, M11, ISM, and QSM.
Cummins also notes that this product is primarily intended for use with certain uncertified 14-liter N14 engines; exact compatibility should be verified with ESN/CPL.
$4.58
In StockRelated products
-
CumminsExhaust Manifold Gasket Cummins Engine M11
Exhaust Manifold Gasket Cummins Engine M11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews)$3.52 Add to cart -
CumminsCamshaft Follower Cummins Engine ISM – Engine QSM
Camshaft Follower Cummins Engine ISM – Engine QSM
The cam follower lever operates directly with the camshaft. The lever’s roller follows the cam profile and transfers the movement to the valve train.
During replacement, it is also advisable to check: the roller surface; the roller pin; lever side play; bushings and lever shaft; camshaft lobes; for the presence of pitting, scoring, or uneven wear.
In fact, Cummins and suppliers require the ESN and CPL to confirm compatibility prior to sale.(0 reviews)$182.26 Add to cart -
CumminsSeal – Valve Stem Cummins Engine M11 – Engine ISM – Engine QSM
Valve Stem Seal Cummins Engine M11 – Engine ISM – Engine QSM
It is used on the valve guide to prevent excessive oil from entering the combustion chamber.
Compatible engines: Cummins L10, LT10, LTA10, M11, ISM, and QSM11.
It is advisable to verify the CPL and serial number of the engine, as some configurations may use a different seal.
(0 reviews) -
CumminsInsert – Intake and Exhaust Valve Cummins Engine M11
Valve Insert / Valve Seat Cummins Engine M11
Cylinder head; can be used as a seat for the intake or exhaust valve, depending on the cylinder head configuration.
Compatible engines: Cummins L10 / LTA10. Some aftermarket catalogs also list the M11, but Cummins officially specifies part number 3418040 primarily for non-certified 10-liter L10 engines. Always verify using the Engine Serial Number (ESN).
(0 reviews)