Additional information
| Weight | 0.3450 lbs |
|---|
Tappet – Hyd Var Timing Cummins Engine L10
Tappet – Hyd Var Timing Cummins Engine L10
$128.72
In StockRelated products
-
CumminsIntake Valve Kit Cummins Engine ISL – Engine QSL
Intake Valve Cummins Engine ISL 8.9 – Engine QSL 8.9 / QSL 9
The valve is installed in the cylinder head, on the intake side of the combustion chamber. Its function is to open the intake port during the correct phase of the engine cycle, allowing air to enter the cylinder, and to close, creating the necessary seal during compression and combustion. It is made of Superalloy, a high-heat-resistance alloy suitable for use in engine valves.
Applications: ISC 8.3, QSC 8.3, ISL 8.9, QSL 8.9 / QSL9
There are also aftermarket catalogs that list the C Series, L10, and M11, but these applications should be verified using the ESN/CPL, because the most specific documentation available focuses the 4089761 primarily on the ISC/QSC/ISL/QSL families.
(0 reviews)$39.29 Add to cart -
CumminsUpper Gasket Set Cummins Engine ISL – Engine QSL
Cylinder Head Gasket Set Cummins Engine ISL 8.9 / ISLe 8.9 – Engine QSL 8.9
This is a set of gaskets and O-rings for the upper part of the engine, used during work on the cylinder head. It is designed to restore the seals after the cylinder head has been removed, preventing leaks. It contains various types of gaskets, O-rings, and sealing washers.
Motors with verified compatibility: 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSCC 8.3, ISL 8.9, ISLe 8.9, QSL 8.9
I always recommend verifying the Engine Serial Number (ESN) and CPL, as well as the ISC/ISL/QSL version. In particular, the included head gasket may have a specific thickness or configuration.
(0 reviews)$334.06 Add to cart -
Oil PumpFront Oil Seal Kit Cummins Engine L10
Front Crankshaft Oil Seal Kit Cummins Engine L10
The kit is installed at the front end of the crankshaft, where the shaft passes through the oil pan/front cover. The oil seal keeps the lubricating oil inside the engine while the crankshaft rotates at high speed.
Used primarily in the Cummins L10, M11, ISM, and QSM11 engine families.
Final compatibility must be verified using the ESN (Engine Serial Number) or CPL, because Cummins may use different configurations of the same engine.
(0 reviews)$35.82 Add to cart -
CumminsWater Pump Cummins Engine L10
Water Pump Cummins Engine L10
Complete water pump for the cooling system, 3-bolt flange, long shaft, 21-tooth gear, cast iron housing.
Compatible engines: Cummins L10, LT10, M11, M11 Celect, M11 Celect Plus, ISM, ISM11, and QSM11
Engines manufactured from 1991 onward; always check with ESN/CPL.
(0 reviews)$382.25 Add to cart