Additional information
| Weight | 4.500 lbs |
|---|---|
| Dimensions | 5 × 5 × 5 in |
Piston Cummins Engine ISL – Engine QSL
Piston Cummins Engine 6C Engine ISC Engine ISL Engine ISL9
$96.91
In StockRelated products
-
CumminsPiston w/Pin, Retainer & Rings Cummins Engine ISL
Piston w/Pin, Retainer & Rings Cummins Engine ISL 8.9 / ISL 9
This is a standard (STD) engine piston kit used primarily on Cummins ISL/QSL 8.9–9.0 L engines, featuring a two-piece piston. The kit is installed inside the cylinder block, connected to the connecting rod via the piston pin. Its function is to absorb the pressure generated by combustion, transfer the force to the connecting rod and then to the crankshaft, seal the combustion chamber via the piston rings, control oil consumption, and transfer part of the heat from the piston to the cylinder liner and the cooling/lubrication system.
It is always a good idea to check the ESN (Engine Serial Number), CPL, the Cummins QuickServe/OEM catalog, engine model, horsepower/rating, piston type (1-piece vs. 2-piece), the number stamped on the cylinder head, and the dimensional comparison.
(0 reviews)$260.97 Add to cart -
CumminsPiston Kit Cummins Engine QSL 8.9 / 9
Piston Kit Cummins Engine QSL 8.9 L / QSL 9
This is an articulated piston kit, used primarily on Cummins QSL9 / QSL 8.9 L engines with the HPCR CM850 system. The kit is mounted inside the cylinder bore and connected to the connecting rod via the pin. Its function is to convert the pressure generated by combustion into linear motion and then, through the connecting rod and crankshaft, into rotational motion. The piston rings ensure that combustion gases are contained, control oil on the cylinder walls, and aid in heat transfer.
Also used in Cummins ISC, QSC, ISL, QSL 8.9 L, and QSL 9 engines.
It should not be automatically considered interchangeable with all QSL9 pistons. There are different configurations; always verify at least one of the following: ESN (Engine Serial Number), CPL, ECM/Control Module, Cummins QuickServe catalog, old piston/crown number, engine application, and dimensional comparison.
(0 reviews)$279.41 Add to cart -
CumminsPiston Kit Cummins Engine QSL 8.9 /L
Piston & Rings Cummins Engine QSL 8.9 / QSL 8.9L
It is described as a two-piece articulated piston, constructed with a forged steel crown and a cast aluminum skirt. It is installed inside the cylinder bore and connected to the connecting rod via the piston pin. The kit converts the pressure generated by combustion into reciprocating motion transmitted to the connecting rod and then to the crankshaft. The piston rings simultaneously ensure compression sealing, oil film control, and heat transfer from the piston to the cylinder bore. The kit consists of Engine Piston 1, Piston Ring Set 1, Top Keystone Piston Ring, Intermediate Piston Ring, Oil Control Piston Ring, and Piston Pin Retainers 2.
Equipped with Cummins ISL 850, ISL 8.9, ISL 8.9L, QSL 8.9, and QSL 8.9L engines.
To avoid installation errors, always verify at least one of the following: Engine Serial Number (ESN), CPL, Cummins QuickServe/OEM catalog, original piston number, crown number, CAPS injection system, or the piston’s physical dimensions.
(0 reviews)$279.29 Add to cart -
Piston KitsKit-Piston Cummins Engine ISL
Kit-Piston Cummins Engine ISL
(0 reviews)$164.33 Add to cart