Additional information
| Weight | 0.480 lbs |
|---|---|
| Dimensions | 20 × 5 × 5 in |
Oil Pan Gasket Cummins Engine ISM
Oil Pan Gasket Cummins Engine ISM
The oil pan gasket seals the joint between the engine block and the oil pan; this is the narrow “early/narrow pan” version, typically with 34 holes.
Primary application for mechanical, non-certified L10 motors with a narrow housing. Some aftermarket catalogs also list it for certain M11 and ISM configurations, but it is not universal for all of these motors.
You must verify the housing type and the motor’s serial number before purchase.
$26.78
In StockRelated products
-
CumminsExhaust Manifold Gasket Cummins Engine M11
Exhaust Manifold Gasket Cummins Engine M11
It is located between the cylinder head and the exhaust manifold; it prevents exhaust gases from escaping.
Cummins specifies the primary use for 10-liter L10 engines; aftermarket catalogs extend the application to the M11, ISM, and QSM families. Final compatibility should be verified using the engine’s serial number.
(0 reviews)$3.52 Add to cart -
CumminsMain Bearing Set 0.010” Cummins Engine M11 – Engine ISM – Engine QSM
Main Bearing Set 0.010” Cummins Engine M11 – Engine ISM – Engine QSM
Main crankshaft bearings 0.010” undersize, equivalente a 0,25 mm; Cummins lists part number 4025121 primarily for non-certified 11-liter M11 engines; other catalogs also list it for the L10, ISM, and QSM11 families.
Exact compatibility must be confirmed with the ESN/CPL, as it may vary depending on the crankshaft configuration.
(0 reviews)$164.95 Add to cart -
CumminsOil Cooler Support Gasket Cummins Engine ISM – Engine QSM
Oil Cooler Gasket Cummins Engine ISM – Engine QSM
It is positioned between the oil cooler bracket/housing and the engine to prevent oil leaks.
Questa guarnizione Cummins risulta utilizzabile su diversi motori della stessa famiglia. Cummins la indica principalmente per l’M11, mentre diversi cataloghi aftermarket la riportano anche per L10, ISM e QSM.
To confirm 100% compatibility, you must check the engine serial number (ESN), because the oil cooler mount may vary depending on the CPL and configuration.
(0 reviews)$1.10 Add to cart -
CumminsGear Cover Plate Gasket Cummins Engine M11
Front Cover Gasket Cummins Engine M11
Seals the gear cover plate. Used with the cast-iron gear cover. Depending on the catalog, it may be listed as “front cover,” “rear cover plate,” or “end plate gasket.”
Main application: 10-liter Cummins L10 engines, especially older, non-certified versions. Some aftermarket catalogs also list it for the M11, ISM, and QSM.
To confirm exact compatibility, it is advisable to check the ESN/CPL, as the application may vary depending on the type of cover.
(0 reviews)$25.45 Add to cart