Rear end of the crankshaft, flywheel side; Rear oil seal with wear ring, prevents oil leakage between the crankshaft and the flywheel housing, For certain L10, M11, ISM11, and QSM11 engines, depending on the engine configuration. Dry-clutch application, Non-REPTO.
Final compatibility must be verified using the engine serial number, because the same M11/ISM model may use a different oil seal depending on the flywheel, clutch, and REPTO configuration.
The oil pan gasket seals the joint between the engine block and the oil pan; this is the narrow “early/narrow pan” version, typically with 34 holes.
Primary application for mechanical, non-certified L10 motors with a narrow housing. Some aftermarket catalogs also list it for certain M11 and ISM configurations, but it is not universal for all of these motors.
You must verify the housing type and the motor’s serial number before purchase.
Cylinder head; can be used as a seat for the intake or exhaust valve, depending on the cylinder head configuration.
Compatible engines: Cummins L10 / LTA10. Some aftermarket catalogs also list the M11, but Cummins officially specifies part number 3418040 primarily for non-certified 10-liter L10 engines. Always verify using the Engine Serial Number (ESN).