Engine
Showing 4401–4440 of 9283 results
-
Rubber Bearing
Johnson 2-3/4” x 3-3/8” x 11” Cutless Naval Brass Sleeve Bearings
Johnson 2-3/4” x 3-3/8” x 11” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 2 and 1/4
B:Outside Diameter (inches): 3 and 1/8
C:Length (inches): 9
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 2-3/4” x 3-3/4” x 11” Cutless Naval Brass Sleeve Bearings
Johnson 2-3/4” x 3-3/4” x 11” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 2 and 3/4
B:Outside Diameter (inches): 3 and 3/4
C:Length (inches): 11
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 3”x 4”x 12″ Cutless Naval Brass Sleeve Bearings
Johnson 3”x 4”x 12″ Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 3
B:Outside Diameter (inches): 3 and 3/4
C:Length (inches): 12
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 3-1/2”x 4-1/2” x 14”Cutless Naval Brass Sleeve Bearings
Johnson 3-1/2”x 4-1/2” x 14” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 3 and 1/2
B:Outside Diameter (inches): 4 and 1/2
C:Length (inches): 14
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 3-1/2”x 4-1/4” x 14 Cutless Naval Brass Sleeve Bearings
Johnson 3-1/2”x 4-1/4” x 14 Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 3 and 1/2
B:Outside Diameter (inches): 4 and 1/4
C:Length (inches): 14
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 3-5/8” x 4-1/2” x14-1/2” Cutless Naval Brass Sleeve Bearings
Johnson 3-5/8” x 4-1/2” x14-1/2” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 3 and 5/8
B:Outside Diameter (inches): 4 and 1/2
C:Length (inches): 14 and 1/2
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 4” x 5” x 16”Cutless Naval Brass Sleeve Bearings
Johnson 4” x 5” x 16” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 4
B:Outside Diameter (inches): 5
C:Length (inches): 16
G:Metal Thickness (inches): 3 and 1/6• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 4-1/2” x 5-1/2” x 18” Cutless Naval Brass Sleeve Bearings
Johnson 4-1/2” x 5-1/2” x 18” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 4 and 1/2
B:Outside Diameter (inches): 5 and 1/2
C:Length (inches): 18
G:Metal Thickness (inches): 3 1/6• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 4”x 5-1/4” x 16 Cutless Naval Brass Sleeve Bearings
Johnson 4”x 5-1/4” x 16 Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 4
B:Outside Diameter (inches): 5 and 1/4
C:Length (inches): 16
G:Metal Thickness (inches): 3 and 1/6• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 4-1/2”x 5-3/4” x 18” Cutless Naval Brass Sleeve Bearings
Johnson 4-1/2”x 5-3/4” x 18” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 4 and 1/2
B:Outside Diameter (inches): 5 and 3/4
C;Length (inches): 18
G:Metal Thickness (inches): 3/16• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 5” x 6-1/8”x 20”Cutless Naval Brass Sleeve Bearings
Johnson 5” x 6-1/8”x 20” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 5
B:Outside Diameter (inches): 6 and 1/8
C:Length (inches): 20
G:Metal Thickness (inches): 1/4• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 5” x 6-1/2” x 20”Cutless Naval Brass Sleeve Bearings
Johnson 5” x 6-1/2” x 20” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 5
B:Outside Diameter (inches): 6 and 1/2
C:Length (inches): 20
G:Metal Thickness (inches): 1/4• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 5-1/2” x 7” x 22” Cutless Naval Brass Sleeve Bearings
Johnson 5-1/2” x 7” x 22” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 5 and 1/2
B:Outside Diameter (inches): 7
C:Length (inches): 22
G:Metal Thickness (inches): 1/4• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 5-3/4” x 7” x 23 Cutless Naval Brass Sleeve Bearings
Johnson 5-3/4” x 7” x 23 Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 5 and 3/4
B:Outside Diameter (inches): 7
C:Length (inches): 23
G:Metal Thickness (inches): 1/4• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Rubber Bearing
Johnson 6”x 7-1/2” x 24” Cutless Naval Brass Sleeve Bearings
Johnson 6”x 7-1/2” x 24” Cutless Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 6
B:Outside Diameter (inches): 7 and 1/2
C:Length (inches): 24
G:Metal Thickness (inches): 1/4• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews) -
Series Engine 50
Kit – Engine Overhaul Detroit Diesel Series 50
Kit – Engine Overhaul Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – Engine Overhaul Detroit Diesel Series 50
Kit – Engine Overhaul Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – Engine Overhaul Detroit Diesel Series 50
Kit – Engine Overhaul Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – Engine Overhaul Detroit Diesel Series 50
Kit – Engine Overhaul Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – Engine Overhaul Detroit Diesel Series 50
Kit – Engine Overhaul Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – Head Bolt Detroit Diesel Series 50
Kit – Head Bolt Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – In-Frame Detroit Diesel Series 50
Kit – In-Frame Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – In-Frame Detroit Diesel Series 50
Kit – In-Frame Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – In-Frame Detroit Diesel Series 50
Kit – In-Frame Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – In-Frame Detroit Diesel Series 50
Kit – In-Frame Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – In-Frame Detroit Diesel Series 50
Kit – In-Frame Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – In-Frame Detroit Diesel Series 50
Kit – In-Frame Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – In-Frame Detroit Diesel Series 50
Kit – In-Frame Detroit Diesel Series 50
(0 reviews) -
Series Engine 50
Kit – In-Frame Detroit Diesel Series 50
Kit – In-Frame Detroit Diesel Series 50
(0 reviews) -
Fresh Water Pump
Kit – Repair – Water Pump Engine Cummins NT855
Kit – Repair – Water Pump Engine Cummins NT855
(0 reviews) -
B Series
Kit Valve Exhaust Cummins Engine ISB 6.7
Kit – Valve – Exhaust Cummins Engine ISB 6.7
(0 reviews) -
Cylinder Head
Kit Valve Exhaust Cummins Engine Series B
Kit – Valve – Exhaust Cummins Engine Series B
(0 reviews) -
Cummins
Exhaust Valve Kit Cummins Engine QSL
Kit – Valve – Exhaust Cummins Engine QSL 9
It ensures the combustion chamber remains airtight and allows for the controlled flow of high-pressure, high-temperature exhaust gases toward the manifold and the turbocharger. The kit includes an exhaust valve and retaining cones.
Used on Cummins Heavy Duty and Medium Duty engines (industrial, marine, automotive, and construction applications) in the ISC (8.3L), ISL / ISL9 / ISLE4 (8.9L), QSC8.3, QSL9, 6C8.3, B4.5, and ISF3.8 engine series. Models from approximately 2002 to the present.
Always verify using the Engine Serial Number (ESN).
(0 reviews) -
Cummins
Kit Valve Exhaust Cummins Engine ISL
Kit – Valve – Exhaust Cummins Engine ISL10 OLD PARTS# 3801357
(0 reviews) -
Cummins
Kit Valve Exhaust Cummins Engine L10 – Engine M11 – Engine ISM – Engine QSM
Kit – Valve – Exhaust Cummins Engine ISL10 OLD PARTS# 3801357
(0 reviews) -
Cummins
Kit Valve Exhaust Cummins Engine 6C 8.3
Kit – Valve – Exhaust Cummins Engine 6C 8.3
It ensures the combustion chamber remains airtight and allows for the controlled flow of high-pressure, high-temperature exhaust gases toward the manifold and the turbocharger. The kit includes an exhaust valve and retaining cones.
Used on Cummins Heavy Duty and Medium Duty engines (industrial, marine, automotive, and construction applications) in the ISC (8.3L), ISL / ISL9 / ISLE4 (8.9L), QSC8.3, QSL9, 6C8.3, B4.5, and ISF3.8 engine series. Models from approximately 2002 to the present.
Always verify using the Engine Serial Number (ESN).
(0 reviews) -
Cummins
Kit Valve Exhaust Cummins Engine B4.5
Kit – Valve – Exhaust Cummins Engine B4.5
It ensures the combustion chamber remains airtight and allows for the controlled flow of high-pressure, high-temperature exhaust gases toward the manifold and the turbocharger. The kit includes an exhaust valve and retaining cones.
Used on Cummins Heavy Duty and Medium Duty engines (industrial, marine, automotive, and construction applications) in the ISC (8.3L), ISL / ISL9 / ISLE4 (8.9L), QSC8.3, QSL9, 6C8.3, B4.5, and ISF3.8 engine series. Models from approximately 2002 to the present.
Always verify using the Engine Serial Number (ESN).
(0 reviews) -
Cummins
Kit Valve Exhaust Cummins Engine ISC
Kit – Valve – Exhaust Cummins Engine ISC
It ensures the combustion chamber remains airtight and allows for the controlled flow of high-pressure, high-temperature exhaust gases toward the manifold and the turbocharger. The kit includes an exhaust valve and retaining cones.
Used on Cummins Heavy Duty and Medium Duty engines (industrial, marine, automotive, and construction applications) in the ISC (8.3L), ISL / ISL9 / ISLE4 (8.9L), QSC8.3, QSL9, 6C8.3, B4.5, and ISF3.8 engine series. Models from approximately 2002 to the present.
Always verify using the Engine Serial Number (ESN).
(0 reviews) -
Cummins
Kit Valve Exhaust Cummins Engine ISL
Kit – Valve – Exhaust Cummins Engine ISL
It ensures the combustion chamber remains airtight and allows for the controlled flow of high-pressure, high-temperature exhaust gases toward the manifold and the turbocharger. The kit includes an exhaust valve and retaining cones.
Used on Cummins Heavy Duty and Medium Duty engines (industrial, marine, automotive, and construction applications) in the ISC (8.3L), ISL / ISL9 / ISLE4 (8.9L), QSC8.3, QSL9, 6C8.3, B4.5, and ISF3.8 engine series. Models from approximately 2002 to the present.
Always verify using the Engine Serial Number (ESN).
(0 reviews) -
Cummins
Kit Valve Exhaust Cummins Engine QSC
Kit – Valve – Exhaust Cummins Engine QSC
It ensures the combustion chamber remains airtight and allows for the controlled flow of high-pressure, high-temperature exhaust gases toward the manifold and the turbocharger. The kit includes an exhaust valve and retaining cones.
Used on Cummins Heavy Duty and Medium Duty engines (industrial, marine, automotive, and construction applications) in the ISC (8.3L), ISL / ISL9 / ISLE4 (8.9L), QSC8.3, QSL9, 6C8.3, B4.5, and ISF3.8 engine series. Models from approximately 2002 to the present.
Always verify using the Engine Serial Number (ESN).
(0 reviews)









