- Page 287 of 342 - ProDieselParts

This is an articulated piston kit, used primarily on Cummins QSL9 / QSL 8.9 L engines with the HPCR CM850 system. The kit is mounted inside the cylinder bore and connected to the connecting rod via the pin. Its function is to convert the pressure generated by combustion into linear motion and then, through the connecting rod and crankshaft, into rotational motion. The piston rings ensure that combustion gases are contained, control oil on the cylinder walls, and aid in heat transfer.

Also used in Cummins ISC, QSC, ISL, QSL 8.9 L, and QSL 9 engines.

It should not be automatically considered interchangeable with all QSL9 pistons. There are different configurations; always verify at least one of the following: ESN (Engine Serial Number), CPL, ECM/Control Module, Cummins QuickServe catalog, old piston/crown number, engine application, and dimensional comparison.

(0 reviews)

$279.41 Add to cart

Cummins

Piston Kit Cummins Engine ISL

Piston Kit Cummins Engine ISL 8.9 L

This is an articulated piston kit, used primarily on Cummins QSL9 / QSL 8.9 L engines with the HPCR CM850 system. The kit is mounted inside the cylinder bore and connected to the connecting rod via the pin. Its function is to convert the pressure generated by combustion into linear motion and then, through the connecting rod and crankshaft, into rotational motion. The piston rings ensure that combustion gases are contained, control oil on the cylinder walls, and aid in heat transfer.

Also used in Cummins ISC, QSC, ISL, QSL 8.9 L, and QSL 9 engines.

It should not be automatically considered interchangeable with all QSL9 pistons. There are different configurations; always verify at least one of the following: ESN (Engine Serial Number), CPL, ECM/Control Module, Cummins QuickServe catalog, old piston/crown number, engine application, and dimensional comparison.

(0 reviews)

$279.41 Add to cart

Cummins

Piston Kit Cummins Engine QSL 8.9 / 9

Piston Kit Cummins Engine QSL 8.9 L / QSL 9

This is an articulated piston kit, used primarily on Cummins QSL9 / QSL 8.9 L engines with the HPCR CM850 system. The kit is mounted inside the cylinder bore and connected to the connecting rod via the pin. Its function is to convert the pressure generated by combustion into linear motion and then, through the connecting rod and crankshaft, into rotational motion. The piston rings ensure that combustion gases are contained, control oil on the cylinder walls, and aid in heat transfer.

Also used in Cummins ISC, QSC, ISL, QSL 8.9 L, and QSL 9 engines.

It should not be automatically considered interchangeable with all QSL9 pistons. There are different configurations; always verify at least one of the following: ESN (Engine Serial Number), CPL, ECM/Control Module, Cummins QuickServe catalog, old piston/crown number, engine application, and dimensional comparison.

(0 reviews)

$279.41 Add to cart

Cummins

Sealing Ring, Liner Cummins Engine 6C – Engine 6CT – Engine 6CTA

Seal, Rectangular Ring – Cylinder Liner Cummins Engine 6C.83 – Engine 6CT 8.3 – Engine 6CTA 8.3

It is mounted in the lower section/seal area of the cylinder liner, between the liner and the engine block. It is part of the cylinder liner sealing system. Its main function is to seal the cylinder liner against the engine block, prevent coolant from flowing into unintended areas, prevent contamination between coolant and engine oil, and maintain proper sealing of the cylinder liner during the engine’s thermal cycles.

Verified compatible Cummins engines: 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9/9, QSL 8.9/9.

I recommend verifying compatibility using the ESN (Engine Serial Number), CPL, QuickServe/Cummins Catalog, cylinder liner number, block number/casting number, engine year/configuration, and a dimensional comparison of the ring.

(0 reviews)

$4.99 Add to cart

Cummins

Cylinder Liner Sealing Ring Cummins Engine QSL

Seal, Rectangular Ring – Cylinder Liner Cummins Engine QSL 8.9 / QSL 9

It is mounted in the lower section/seal area of the cylinder liner, between the liner and the engine block. It is part of the cylinder liner sealing system. Its main function is to seal the cylinder liner against the engine block, prevent coolant from flowing into unintended areas, prevent contamination between coolant and engine oil, and maintain proper sealing of the cylinder liner during the engine’s thermal cycles.

Verified compatible Cummins engines: 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9/9, QSL 8.9/9.

I recommend verifying compatibility using the ESN (Engine Serial Number), CPL, QuickServe/Cummins Catalog, cylinder liner number, block number/casting number, engine year/configuration, and a dimensional comparison of the ring.

(0 reviews)

$4.99 Add to cart

Cummins

Cylinder Liner Sealing Ring Cummins Engine ISC 8.3 – Engine QSC 8.3

Seal, Rectangular Ring – Cylinder Liner Cummins Engine ISC 8.3 – Engine QSC 8.3

It is mounted in the lower section/seal area of the cylinder liner, between the liner and the engine block. It is part of the cylinder liner sealing system. Its main function is to seal the cylinder liner against the engine block, prevent coolant from flowing into unintended areas, prevent contamination between coolant and engine oil, and maintain proper sealing of the cylinder liner during the engine’s thermal cycles.

Verified compatible Cummins engines: 6C 8.3, 6CT 8.3, 6CTA 8.3, ISC 8.3, QSC 8.3, ISL 8.9/9, QSL 8.9/9.

I recommend verifying compatibility using the ESN (Engine Serial Number), CPL, QuickServe/Cummins Catalog, cylinder liner number, block number/casting number, engine year/configuration, and a dimensional comparison of the ring.

(0 reviews)

$4.99 Add to cart