Johnson  3-5/8” x 4-1/2” x14-1/2”  Cutless ® Naval Brass Sleeve Bearings

Picture Dimensions of Able Cutlass Bearing

A:Shaft Diameter (inches): 3 and 5/8
B:Outside Diameter (inches): 4 and 1/2
C:Length (inches): 14 and 1/2
G:Metal Thickness (inches): 1/8

• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.

Metallic Rubber Bering

Brand:  Duramax Marine LLC

Johnson 4” x 5” x 16”  Cutless ® Naval Brass Sleeve Bearings

Picture Dimensions of Able Cutlass Bearing

A:Shaft Diameter (inches): 4
B:Outside Diameter (inches): 5
C:Length (inches): 16
G:Metal Thickness (inches): 3 and 1/6

• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.

Metallic Rubber Bering

Brand:  Duramax Marine LLC

Johnson 4-1/2”x 5-3/4” x 18”  Cutless ® Naval Brass Sleeve Bearings

Picture Dimensions of Able Cutlass Bearing

A:Shaft Diameter (inches): 4 and 1/2
B:Outside Diameter (inches): 5 and 3/4
C;Length (inches): 18
G:Metal Thickness (inches): 3/16

• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.

Metallic Rubber Bering

Brand:  Duramax Marine LLC

Johnson  5” x 6-1/8”x 20” Cutless ® Naval Brass Sleeve Bearings

Picture Dimensions of Able Cutlass Bearing

A:Shaft Diameter (inches): 5
B:Outside Diameter (inches): 6 and 1/8
C:Length (inches): 20
G:Metal Thickness (inches): 1/4

• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.

Metallic Rubber Bering

Brand:  Duramax Marine LLC

Johnson 6”x 7-1/2” x 24” Cutless Naval Brass Sleeve Bearings

Picture Dimensions of Able Cutlass Bearing

A:Shaft Diameter (inches): 6
B:Outside Diameter (inches): 7 and 1/2
C:Length (inches): 24
G:Metal Thickness (inches): 1/4

• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.

Metallic Rubber Bering

Brand:  Duramax Marine LLC