Additional information
| Weight | 0.975 lbs |
|---|---|
| Dimensions | 7 × 7 × 2 in |
Front Crankshaft Seal Kit Cummins Engine L10
It Is Part Of The Conversion Gasket Set lower Cummins Engine L10
$37.72
In StockRelated products
-
CumminsVibration Damper Cummins Engine L10 – Engine ISL – Engine QSL
Tuned Vibration Damper / Crankshaft Vibration Damper Cummins Engine L10 – Engine ISL – Engine QSL
It is fitted to the front end of the crankshaft and serves to absorb and dampen the torsional vibrations of the crankshaft generated by combustion pulses. It normally consists of a heavy metal structure with an internal damping element; it is also marketed as a viscous vibration damper.
Used on C / 6C 8.3 – ISC – QSC – ISL – QSL engines.
Before making a purchase, I always recommend checking the ESN and CPL, or the Cummins OEM catalogue, as the same 8.3 L engine may use different dampers depending on its configuration, power output, year of manufacture and accessory layout.
(0 reviews) -
CumminsVibration Damper Cummins Engine L10 – Engine ISL – Engine QSL
Tuned Vibration Damper / Crankshaft Damper / Harmonic Balancer Cummins Engine L10 – Engine ISL 8.9 – Engine QSL 8.9
It is not just a simple pulley. It is installed at the front end of the crankshaft and functions as a harmonic balancer mounted on the front end of the crankshaft. It serves to reduce torsional vibrations and oscillations of the crankshaft generated during diesel engine operation. It features a metal construction with an elastomeric/rubber damping element.
Viene aplicato su motori: 6C 8.3 /L, 6CT 8.3 /L, 6CTA 8.3 /L, ISC 8.3, QSC 8.3, ISL 8.9, L10, QSL 8.9.
Always verify the ESN/CPL before placing an order, especially for ISC and QSL/L8.9 applications.
(0 reviews) -
GasketsOil Pan Gasket Cummins Engine L10
Oil Pan Gasket Cummins Engine L10
The oil pan gasket seals the joint between the engine block and the oil pan; this is the narrow “early/narrow pan” version, typically with 34 holes.
Primary application for mechanical, non-certified L10 motors with a narrow housing. Some aftermarket catalogs also list it for certain M11 and ISM configurations, but it is not universal for all of these motors.
You must verify the housing type and the motor’s serial number before purchase.
(0 reviews) -
Oil PumpFront Oil Seal Kit Cummins Engine L10
Front Crankshaft Oil Seal Kit Cummins Engine L10
The kit is installed at the front end of the crankshaft, where the shaft passes through the oil pan/front cover. The oil seal keeps the lubricating oil inside the engine while the crankshaft rotates at high speed.
Used primarily in the Cummins L10, M11, ISM, and QSM11 engine families.
Final compatibility must be verified using the ESN (Engine Serial Number) or CPL, because Cummins may use different configurations of the same engine.
(0 reviews)